| Technical Certificates of Credit - Industrial Technologies |
| Technical Certificates of Credit - Industrial Technologies |
ADVANCED CABINETMAKING
Submitted by Lanier TI and board approved in May 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAB 104 |
Wood Joints |
3 |
Diploma |
|
CAB 105 |
Fastening Methods |
6 |
Diploma |
|
CAB 107 |
Door, Drawer, and Hardware Installation |
5 |
Diploma |
|
CAB 108 |
Cabinet Assembly III |
5 |
Diploma |
|
CAB 109 |
Plastic Laminates and Wood Veneers |
2 |
Diploma |
|
CAB 110 |
Cabinet Finishing and Install. |
4 |
Diploma |
Total Credits 25
Admissions Criteria:
Completion of application and related procedures.
AEROSPACE MACHINE TOOL OPERATOR
Submitted by Macon TI and board approved in October 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MCH 101 |
Introduction to Machine Tool |
6 |
Diploma |
|
MCH 102 |
Blueprint Reading for Machine Tool |
5 |
Diploma |
|
MCH 115 |
Mill Operations I |
7 |
Diploma |
Total Credits 18
Admissions Criteria:
Required Age 18
High School Diploma/GED yes
Minimum Test Scores
Reading 33
English 32
Math 35
AIR CONDITIONING REPAIR
Submitted by Ben Hill-Irwin TI and board approved in May 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ACT 100 |
Refrigeration Fund. |
4 |
Diploma |
|
ACT 103 |
Electrical Fund. |
8 |
Diploma |
|
ACT 104 |
Electric Motors |
3 |
Diploma |
|
ACT 110 |
Gas Heating Systems |
5 |
Diploma |
|
ACT 112 |
Heat Pumps |
3 |
Diploma |
Total Credits 23
Admissions Criteria:
1. Meet special admissions criteria. Plus applicants must have air conditioning experience or permission from the air conditioning instructor.
2. Completion of application and related procedures.
AIR CONDITIONING TECHNICIAN'S ASSISTANT
Submitted by Griffin TI and board approved in March 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ACT 100 |
Refrigeration Fund. |
4 |
Diploma |
|
ACT 101 |
Refrigeration Fund. |
7 |
Diploma |
|
ACT 102 |
Refrigeration Comp. |
7 |
Diploma |
Total Credits 18
Admissions Criteria:
Required Age 16
High School Diploma or GED N/A
Minimum Test Scores
Reading 38
ASSET English 35
Mathematics 35
Other:
Regular program admission status.
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
AIRCRAFT ASSEMBLER
Submitted by South Georgia TI and board approved in February 1995.
Total Credits
AIRCRAFT ASSEMBLY WORKER
Submitted by Heart of Georgia TI and board approved in July 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AST 120 |
Indus. Spec. Blueprint |
4 |
Newly Developed |
|
AST 121 |
Structural Fund. |
8 |
Newly Developed |
|
AST 122 |
Structural Layout and Fabrication |
3 |
Newly Developed |
Total Credits 15
Admissions Criteria:
Required Age 18
High School Diploma or GED Yes
Other: Passing scores on FIT Arithmetic Test, FIT Assembly Test, Industrial Reading Test. Specific screening tests requested by local aerospace industry representatives. Instruments used by aerospace industry.
AIRCRAFT BLUEPRINT READER
Submitted by Middle Georgia TI and board approved in September 1995.
Total Credits 25
AIRCRAFT/COMPOSITES STRUCTURES
Submitted by Middle Georgia TI and board approved in September 1995.
Total Credits 36
AIRCRAFT STRUCTURAL HELPER
Submitted by Middle Georgia TI and board approved in September 1995.
Total Credits 16
AIRCRAFT STRUCTURAL MAINTENANCE
Submitted by Macon TI and board approved in July 1994.
Total Credits
AIRCRAFT STRUCTURAL WORKER
Submitted by Middle Georgia TI and board approved in September 1995.
Total Credits 33
AS-400 SPECIALIST
Submitted by Walker TI and board approved in April 1995.
Total Credits
AUTO ALIGNMENT AND BRAKES SPECIALIST
Submitted by Columbus TI and board approved in August 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. To Automotive Tech. |
3 |
Diploma |
|
AUT 102 |
Brake Systems |
6 |
Diploma |
|
AUT 103 |
Suspension and Steering Sys. |
4 |
Diploma |
|
AUT 106 |
Intro. To Automotive Elec. Sys. |
5 |
Diploma |
|
AUT 114 |
Front and Rear Suspension |
5 |
Diploma |
|
AUT 115 |
Four-Wheel Alignment |
5 |
Diploma |
Total Credits 28
Admissions Criteria:
Required Age 16
High School Diploma/GED no
Minimum Test Scores
Reading 34
English 33
Math 33
AUTOCAD OPERATOR
Submitted by West Georgia TI and board approved in March 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CMP 101 |
Intro to Microcomp. |
3 |
Diploma |
|
DDF 101 |
Intro. to Drafting |
6 |
Diploma |
|
DDF 102 |
Size & Shape Description I |
5 |
Diploma |
|
DDF 103 |
Size & Shape Description II |
5 |
Diploma |
|
DDF 105 |
Auxiliary Views |
3 |
Diploma |
|
DDF 106 |
Fasteners |
3 |
Diploma |
|
DDF 107 |
Intro. to CAD |
5 |
Diploma |
|
DDF 109 |
Assembly Drawings I |
5 |
Diploma |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
MAT 104 |
Geom. & Trigonometry |
5 |
Diploma |
Total Credits 45
Admissions Criteria:
Required Age 16
High School Diploma or GED
Minimum Test Scores
Reading 26
English 18
Mathematics 24
Algebra 22
Other:
Completion of application and related procedures.
AUTOCAD REFRESHER
Submitted by Moultrie Area TI and board approved in January 1997.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CMP 101 |
Introduction to Microcomputers |
3 |
Diploma |
|
DDF 104 |
Pictorial Drawing |
3 |
Diploma |
|
DDF 107 |
Introduction to CAD |
5 |
Diploma |
|
DDS 205 |
Residential Arch. Drawing I |
6 |
Diploma |
|
DDS 208 |
Residential Arch. Drawing II |
6 |
Diploma |
|
DDS 202 |
Advanced CAD |
6 |
Diploma |
Total Credits 29
Admissions Criteria:
Required Age 16
High School Diploma/GED yes
Minimum Test Scores
English 18
Reading 26
Math 24
Algebra 22
AUTOMATIC TRANSMISSION/TRANSAXLE REPAIR
Submitted by Ben-Hill Irwin TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto Technology |
3 |
Diploma |
|
AUT 104 |
Auto. Transm./Trans. I |
3 |
Diploma |
|
AUT 106 |
Intro. to Auto. Electr. Systems |
6 |
Diploma |
|
AUT 202 |
Auto. Transm./Trans. II |
3 |
Diploma |
Total Credits 25
Admissions Criteria:
Required Age 16
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.) Competencies located in AUT 104 and AUT 106 are needed to enter this program, or
prior automotive technical experience is required.
AUTOMATIC TRANSMISSION/TRANSAXLE SYSTEMS
Submitted by DeKalb TI and board approved in February 1995.
Total Credits
AUTOMATIC TRANSMISSION/TRANSAXLE TECHNICIAN
Submitted by Thomas TI and board approved in March 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto Tech. |
3 |
Diploma |
|
AUT 104 |
Auto. Transm./Trans. I |
3 |
Diploma |
|
AUT 106 |
Intro. to Auto. Electr. Systems |
6 |
Diploma |
|
AUT 202 |
Auto. Transm./Trans. II |
13 |
Diploma |
|
AUT 204 |
Drivelines |
3 |
Diploma |
Total Credits 28
Admissions Criteria:
Required Age 16
High School Diploma or GED Desirable
Minimum Test Scores
Reading 26
English 19
Mathematics 20
Algebra N/A
Other:
Current drivers license.
AUTO BODY ASSISTING/WARRANTY SERVICE
Submitted by Macon TI and board approved on April 1995.
Total Credits
AUTO BODY REPAIR ASSISTING
Submitted by Lanier TI and board approved in April 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ACR 100 |
Safety |
1 |
Diploma |
|
ACR 101 |
Auto. Components ID |
3 |
Diploma |
|
ACR 102 |
Equip. & Hand Tools ID |
1 |
Diploma |
|
ACR 105 |
Body Fibgl., Plas., and Rubber Repair Technq. |
3 |
Diploma |
|
ACR 107 |
Trim, Acces. and Glass |
2 |
Diploma |
|
ACR 110 |
Minor Collision Repair |
2 |
Diploma |
|
ACR 130 |
Sand., Prim., and Paint Prep. |
4 |
Diploma |
|
ACR 131 |
Acryl. Lacq. Refinish. Applica. |
3 |
Diploma |
|
ACR 133 |
Acryl. Enam. Refinish. Applica. |
6 |
Diploma |
Total Credits 25
Admissions Criteria:
Meet special admissions criteria (only available for programs requiring 25 hours or less).
AUTO COLLISION MAJOR REPAIR ASSISTING
Submitted by Heart of Georgia TI and board approved in July 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ACR 120 |
Conventional Frame Repair |
2 |
Diploma |
|
ACR 121 |
Unibody Id. And Damage Analysis |
2 |
Diploma |
|
ACR 122 |
Unibody Meas. and Fixing Systems |
2 |
Diploma |
|
ACR 123 |
Unibody Straightening Sys. and Tech. |
4Diploma |
|
|
ACR 124 |
Unibody Welding Tech. |
3 |
Diploma |
|
ACR 125 |
Unibody Struc. Panel Repair and Replace. |
4 |
Diploma |
|
ACR 126 |
Conv. Body Struc. Panel Repair |
2 |
Diploma |
|
ACR 127 |
Unibody Susp. and Steering Systems |
1 |
Diploma |
|
ACR 128 |
Bolt-on Body Panel Removal and Replace. |
3 |
Diploma |
|
XXX xxx |
Electives |
8 |
Diploma |
Total Credits 31
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 38
English 35
Mathematics 35
Other: Completion of application and related procedures for program admission. Completion of Automotive Collision Repair Assistant Technical Certificate of Credit.
AUTO COLLISION REPAIR PAINT AND REFINISHING ASSISTANT
Submitted by Heart of Georgia TI and board approved in July 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ACR 130 |
Sanding, Priming and Paint Preparation |
4 |
Diploma |
|
ACR 131 |
Acrylic Lacquer Refin. Applications |
3 |
Diploma |
|
ACR 132 |
Special Refin. Apps. |
4 |
Diploma |
|
ACR 133 |
Acrylic Enamels Refin. Applications |
6 |
Diploma |
|
ACR 134 |
Urethane Enamels Refin. |
Applications |
6 |
|
ACR 135 |
Tint and Match Colors |
6 |
Diploma |
|
XXX xxx |
Electives |
2 |
Diploma |
Total Credits 31
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 38
English 35
Mathematics 35
Other: Completion of application and related procedures for program admission. Completion of Auto Collision Repair Assistant Technical Certificate of Credit.
AUTO FRONT END ALIGNMENT AND BRAKES SPECIALIST
Submitted by North Georgia TI and board approved in March 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto. Tech. |
3 |
Diploma |
|
AUT 102 |
Brake Systems |
6 |
Diploma |
|
AUT 103 |
Susp. & Steer. Systems |
8 |
Diploma |
Total Credits 17
Admissions Criteria:
1. Meet special admissions criteria (for programs that require 25 hours or less).
2. Completion of application and related procedures.
AUTO PAINT AND REFINISHING ASSISTING
Submitted by Lanier TI and board approved in April 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ACR 100 |
Safety |
1 |
Diploma |
|
ACR 101 |
Auto. Components ID |
3 |
Diploma |
|
ACR 102 |
Equip. & Hand Tools ID |
1 |
Diploma |
|
ACR 105 |
Body Fibgl., Plas., and Rubber Repair Techn. |
3 |
Diploma |
|
ACR 107 |
Trim, Acces. and Glass |
2 |
Diploma |
|
ACR 110 |
Minor Collision Repair |
2 |
Diploma |
|
ACR 130 |
Sand., Prim., and Paint Prep. |
4 |
Diploma |
|
ACR 131 |
Acryl. Lacq. Refinish. Applica. |
3 |
Diploma |
|
ACR 133 |
Acryl. Enam. Refinish. Applica. |
6 |
Diploma |
Total Credits 25
Admissions Criteria:
Meet special admission criteria (only available for programs requiring no more than 25 hours).
AUTO ELECTRICAL TECHNICIAN
Submitted by Thomas TI and board approved in March 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto. Technology |
3 |
Diploma |
|
AUT 106 |
Intro. to Auto. Electrical Systems |
6 |
Diploma |
|
AUT 107 |
Starting & Charging Systems |
5 |
Diploma |
|
AUT 109 |
Electr./Electrn. Installation |
7 |
Diploma |
Total Credits 21
Admissions Criteria:
Required Age 16
High School Diploma or GED Desirable
Minimum Test Scores
Reading 26
English 19
Mathematics 20
Algebra N/A
Other:
Current drivers license.
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
AUTO HEATING AND AIR CONDITIONING TECHNICIAN
Submitted by Thomas TI and board approved in March 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto. Technology |
3 |
Diploma |
|
AUT 106 |
Intro. to Auto. Electrical Systems |
6 |
Diploma |
|
AUT 206 |
Heat. & Air Cond. Systems |
6 |
Diploma |
Total Credits 15
Admissions Criteria:
Required Age 16
High School Diploma or GED Desirable
Minimum Test Scores
Reading 26
English 19
Mathematics 20
Algebra N/A
Other:
Current drivers license.
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
AUTOMOTIVE AIR CONDITIONING
Submitted by Athens TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto. Technology |
3 |
Diploma |
|
AUT 106 |
Intro. to Auto. Electrical Systems |
6 |
Diploma |
|
AUT 109 |
Electr./Electrn. Instr. |
7 |
Diploma |
|
AUT 206 |
Heat. & Air Cond. Systems |
6 |
Diploma |
Total Credits 22
Admissions Criteria:
Required Age 16
High School Diploma or GED No
Minimum Test Scores
Reading 26
English 18
Mathematics 20
Algebra N/A
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
AUTOMOTIVE COMPUTER CONTROLLED ENGINES
Submitted by Bainbridge College and board approved in October 1996
|
Course# |
Name |
Credit Hrs. |
Source |
|
AMC 111 |
Specialized Electronics Training |
5 |
Diploma |
|
AMC 128 |
Auto Computer Fundamentals |
5 |
Diploma |
|
AMC 103 |
Computer Conrolled Fuel and Ignition |
5 |
Diploma |
Admissions Criteria:
Required Age 16
High School Diploma/GED no
Minimum Test Scores
Reading 38
English 35
Math 35
AUTOMOTIVE ELECTRICAL TECHNICIAN
Submitted by Heart of Georgia TI and board approved in July 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto. Tech. |
3 |
Diploma |
|
AUT 106 |
Intro. to Auto. Elec. Systems |
5 |
Diploma |
|
AUT 107 |
Starting and Charging Systems |
4 |
Diploma |
|
AUT 109 |
Elec./Electronic Ins. |
6 |
Diploma |
Total Credits 18
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 38
English 32
Mathematics 35
OR
A minimum of one year successful employment in field of study.
Other: Completion of application and related procedures for program admission.
AUTOMOTIVE FRONT END ALIGNMENT AND BRAKES SPECIALIST
Submitted by Heart of Georgia TI and board approved in August 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto.Technology |
3 |
Diploma |
|
AUT 102 |
Brake Systems |
6 |
Diploma |
|
AUT 103 |
Susp. and Steering Systems |
4 |
Diploma |
|
AUT 113 |
Anti-Lock Brake Systems |
3 |
Diploma |
Total Credits 16
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores:
Reading 38 33 (prov.)
English 35 32 (prov.)
Math 35 31 (prov.)
Algebra N/A
OR:
A minimum of one year of successful employment in the field of study.
AUTOMOTIVE TUNE-UP, ELECTRICAL, & ELECTRONIC REPAIR
Submitted by Athens TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto. Technology |
3 |
Diploma |
|
AUT 106 |
Intro. to Auto. Electrical Systems |
6 |
Diploma |
|
AUT 107 |
Start. & Charg. Systems |
5 |
Diploma |
|
AUT 108 |
Ignition Systems |
6 |
Diploma |
|
AUT 109 |
Electr./Electrn. Instr. |
7 |
Diploma |
|
AUT 111 |
Fuel & Exhaust Systems |
3 |
Diploma |
|
AUT 112 |
Emission Ctrl. Systems |
12 |
Diploma |
Total Credits 42
Admissions Criteria:
Required Age 16
High School Diploma or GED No
Minimum Test Scores
Reading 26
English 18
Mathematics 20
Algebra N/A
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
AUTO PARTS PROFESSIONAL SALES/MANAGEMENT
Submitted by Gwinnett TI and board approved in May 1996.
Total Credits 37
BASIC ARCHITECTURAL DRAFTING
Submitted by West Georgia TI and board approved in April 1995.
Total Credits
BASIC AUTOCAD OPERATOR
Submitted by Macon TI and board approved in October 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
CIS 100 |
Intro to Microcomp. |
3 |
Diploma |
|
DDF 103 |
Size/Shape Desc. II |
5 |
Diploma |
|
DDF 104 |
Pictorial Drawing |
3 |
Diploma |
|
DDF 107 |
Intro to CAD |
5 |
Diploma |
|
DDF 109 |
Assembly Drawings I |
5 |
Diploma |
|
DDS 202 |
Advanced CAD |
6 |
Diploma |
Total Credits 32
Admissions Criteria:
Required Age 16
High School Diploma or GED Required
Minimum Test Scores
Reading 38
English 35
Mathematics
Algebra 42
Other: Any applicant applying for this certificate must show that he/she is employed in the drafting field and possesses basic drafting skills. Provisional admission status is available with Developmental Studies courses as required in Drafting Program Standards.
BASIC AUTOCAD SPECIALIST
Submitted by South Georgia TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CIS 102 |
Intro. to Computers |
6 |
Diploma |
|
DDF 102 |
Size & Shape Description I |
5 |
Diploma |
|
DDF 103 |
Size & Shape Description II |
5 |
Diploma |
|
DDF 104 |
Pictorial Drawing |
3 |
Diploma |
|
DDF 107 |
Intro. to CAD |
5 |
Diploma |
|
DDF 109 |
Assembly Drawing I |
5 |
Diploma |
|
DDS 202 |
Advanced CAD |
6 |
Diploma |
Total Credits 35
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 26
English 18
Mathematics 24
Algebra 22
Completion of application and related procedures.
BASIC AUTOMOTIVE SERVICE
Submitted by Gwinnett TI and board approved in July 1994.
Total Credits
BASIC CAD DRAFTER
Submitted by Ben Hill-Irwin TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CMP 101 |
Intro. to Microcomp. |
3 |
Diploma |
|
DDF 101 |
Intro. to Drafting |
6 |
Diploma |
|
DDF 102 |
Size & Shape Description I |
5 |
Diploma |
|
DDF 103 |
Size & Shape Description II |
5 |
Diploma |
|
DDF 105 |
Auxiliary Views |
3 |
Diploma |
|
DDF 106 |
Fasteners |
3 |
Diploma |
|
DDF 107 |
Intro. to CAD |
5 |
Diploma |
|
DDF 109 |
Assembly Drawing I |
5 |
Diploma |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
MAT 104 |
Geometry & Trigonometry 5 |
Diploma |
Total Credits 40
Admissions Criteria:
Required Age 16
High School Diploma or GED
Minimum Test Scores
Reading 26
English 18
Mathematics
Algebra 22
BASIC DRAFTER
Submitted by Lanier TI and board approved in April 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
DDF 101 |
Intro. to Drafting |
6 |
Diploma |
|
DDF 102 |
Size & Shape Des. I |
5 |
Diploma |
|
DDF 103 |
Size & Shape Des. II |
5 |
Diploma |
|
DDF 104 |
Pictorial Drawings |
3 |
Diploma |
|
DDF 105 |
Auxiliary Views |
3 |
Diploma |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
MAT 104 |
Geometry & Trigonometry |
5 |
Diploma |
Total Credits 32
Admissions Criteria:
Required Age
High School Diploma or GED
Minimum Test Scores
Reading
English
Mathematics
Algebra
Completion of application and related procedures.
BASIC DRAFTING
Submitted by Swainsboro TI and board approved in February 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
DDF 101 |
Intro. to Drafting |
6 |
Diploma |
|
DDF 102 |
Size & Shape Descr. I |
5 |
Diploma |
|
DDF 103 |
Size & Shape Descr. II |
5 |
Diploma |
|
DDF 107 |
Intro. to CAD |
5 |
Diploma |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
MAT 104 |
Geometry & Trigonometry |
5 |
Diploma |
Total Credits 31
Admissions Criteria:
Required Age
High School Diploma or GED To meet standard admiss. requirements
Minimum Test Scores
Reading
English
Mathematics
Algebra
Completion of application and related procedures.
BASIC ELECTRICAL TECHNICIAN
Submitted by Macon TI and board approved in September 1994.
Total Credits
BASIC ELECTRICITY AND ELECTRONICS
Submitted by Heart of Georgia TI and board approved in July 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ELC 104 |
Soldering Tech. |
2 |
Diploma |
|
ELC 152 |
Prep. Elec. And Electronics Trng. I |
4 |
Diploma |
|
ELC 153 |
Prep. Elec. and Electronics Trng. II |
4 |
Diploma |
|
IMT 129 |
Industrial Wiring I |
5 |
Diploma |
Total Credits 15
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 38
English 35
Mathematics 35
OR
A minimum of one year successful employment in field of study.
Other: Completion of application and related procedures for program admission.
BASIC ELECTRONIC ASSEMBLER
Submitted by Moultrie TI and board approved in September 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
ELC 104 |
Soldering Technology |
2 |
Diploma |
|
ELC 106 |
Direct Current I |
4 |
Diploma |
|
ELC 108 |
Direct Current II |
4 |
Diploma |
Total Credits 15
Admissions Criteria:
Meet special admissions criteria.
BASIC ELECTRONIC COMPUTER INSTALLATION
Submitted by Moultrie TI and board approved in September 1993.
|
Course |
Name |
Credit Hrs. |
Source |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
ELC 104 |
Soldering Technology |
2 |
Diploma |
|
ELC 106 |
Direct Current I |
4 |
Diploma |
|
ELC 108 |
Direct Current II |
4 |
Diploma |
|
ELC 111 |
Microcomputer Applications I |
3 |
Diploma |
|
ELC 118 |
Digital Electronics I |
4 |
Diploma |
Total Credits 22
Admissions Criteria:
Meet special admissions criteria.
BASIC ELECTRONICS FOR U.S. ARMY OCCUPATIONS
Submitted by Augusta TI and board approved in May 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
EES 171 |
Direct Curr. Basics |
4 |
|
|
EES 172 |
Altern. Curr. Basics |
4 |
|
|
EES 181 |
Solid State Devices |
3 |
|
|
EES 182 |
Solid State Applicat. |
5 |
|
|
EES 191 |
Dig. Electron. Basics |
4 |
Total Credits 20
Admissions Criteria:
All students participating in this program will be high school graduates who have a composite score (EL) of 95 or above on the Armed Services Vocational Aptitude Battery (ASVAB).
BASIC GAS TUNGSTEN ARC WELDING
Submitted by Valdosta TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
WLD 100 |
Intro. to Weld. Tech. |
6 |
Diploma |
|
WLD 110 |
Gas Tungsten Arc Weld. |
4 |
Diploma |
|
WLD 150 |
Adv. Tungsten Arc Weld. |
5 |
Diploma |
Total Credits 15
Admissions Criteria:
Required Age
High School Diploma or GED
Minimum Test Scores
Reading
English
Mathematics
Algebra
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
BASIC INDUSTRIAL MECHANICS
Submitted by Middle Georgia TI and board approved in March 1995.
Total Credits
BASIC MACHINE OPERATOR
Submitted by Lanier TI and board approved in March 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 101 |
General Mathematics |
5 |
Diploma |
|
MCH 101 |
Intro. to Machine Tool |
6 |
Diploma |
|
MCH 102 |
Blueprint Reading for Machine Tool |
5 |
Diploma |
Total Credits 16
Admissions Criteria:
Meet special admissions criteria (only available for programs requiring no more than 25 hours).
Completion of application and related procedures.
BASIC MACHINING
Submitted by Gwinnett TI and board approved in July 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MCH 101 |
Introduction to Machine Tool |
6 |
Diploma |
|
MCH 102 |
Blueprint Reading I |
5 |
Diploma |
|
MCH 104 |
Machine Tool Math I |
5 |
Diploma |
|
MCH 109 |
Lathe Operations I |
7 |
Diploma |
|
MCH 112 |
Surface Grinder Operations |
6 |
Diploma |
|
MCH 115 |
Mill Operations |
7 |
Diploma |
|
MCH 105 |
Machine Math II |
5 |
Elective |
|
MCH 107 |
Characteristics of Metals |
4 |
Elective |
|
MCH 114 |
Blueprint Reading II |
5 |
Elective |
|
WLD 100 |
Introduction to Welding |
6 |
Elective |
|
XXX xxx |
Instructor Approved Substitute |
5 |
Elective |
Total Credits 40- 42
Admissions Criteria:
Required Age
High School Diploma/GED
Minimum Test Scores
Reading 38
English 35
Math 31
Algebra 42
BASIC PRESSURE VESSEL WELDING
Submitted by Thomas TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
WLD 100 |
Intro. to Weld. Tech. |
6 |
Diploma |
|
WLD 101 |
Oxyfuel Cutting |
4 |
Diploma |
|
WLD 104 |
Shielded Metal Arc Welding I |
6 |
Diploma |
|
WLD 105 |
Shielded Metal Arc Welding III |
6 |
Diploma |
|
WLD 107 |
Shielded Metal Arc Welding IV |
6 |
Diploma |
|
WLD 109 |
Gas Metal Arc Welding |
6 |
Diploma |
|
WLD 153 |
Flux Core Arc Welding |
5 |
Elective |
Total Credits 45
Admissions Criteria:
Required Age 18
High School Diploma or GED Desirable
Minimum Test Scores
Reading 18
English 16
Mathematics 14
Algebra N/A
Or:
Currently employed as a welder in the boiler industry, or documented working experience in the field indicating ability to succeed.
BASIC SHIELDED METAL ARC WELDING
Submitted by Augusta TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
WLD 100 |
Intro. to Weld. Tech. |
6 |
Diploma |
|
WLD 101 |
Oxyfuel Cutting |
4 |
Diploma |
|
WLD 104 |
Shielded Metal Arc Welding I |
6 |
Diploma |
Total Credits 16
Admissions Criteria:
Required Age 16
High School Diploma or GED no
Minimum Test Scores
Reading
English
Mathematics
Algebra
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
BASIC STRUCTURAL STEEL WELDING
Submitted by Thomas TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
WLD 100 |
Intro. to Weld. Tech. |
6 |
Diploma |
|
WLD 101 |
Oxyfuel Cutting |
4 |
Diploma |
|
WLD 104 |
Shielded Metal Arc Welding I |
6 |
Diploma |
|
WLD 105 |
Shielded Metal Arc Welding II |
6 |
Diploma |
|
WLD 106 |
Shielded Metal Arc Welding III |
6 |
Diploma |
|
WLD 153 |
Flux Core Arc Welding |
5 |
Elective |
Total Credits 33
Admissions Criteria:
Required Age 18
High School Diploma or GED Desirable
Minimum Test Scores
Reading 18
English 16
Mathematics 14
Algebra N/A
Or:
Currently employed as a welder in the boiler industry, or documented working experience in the field indicating ability to succeed.
BASIC VERSACAD SPECIALIST
Submitted by South Georgia TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CIS 102 |
Intro. to Computers |
6 |
Diploma |
|
DDF 102 |
Size & Shape Descr. I |
5 |
Diploma |
|
DDF 103 |
Size & Shape Descr. II |
5 |
Diploma |
|
DDF 104 |
Pictorial Drawing |
3 |
Diploma |
|
DDF 107 |
Intro. to CAD |
5 |
Diploma |
|
DDF 109 |
Assembly Drawings I |
5 |
Diploma |
|
DDS 102 |
Advanced CAD |
6 |
Diploma |
Total Credits 35
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 26
English 18
Mathematics 24
Algebra 22
Completion of application and related procedures.
BIOMEDICAL ELECTRONICS TECHNOLOGY
Submitted by Macon TI and board approved in April 1995.
Total Credits
BRAKE SUSPENSION/STEERING SYSTEMS
Submitted by DeKalb TI and board approved in July 1995.
Total Credits
BRAKES TECHNICIAN
Submitted by Thomas TI and board approved in March 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto. Tech. |
3 |
Diploma |
|
AUT 102 |
Brake Systems |
6 |
Diploma |
|
AUT 106 |
Intro. to Auto. Electr. Systems |
6 |
Diploma |
Total Credits 15
Admissions Criteria:
Required Age 16
High School Diploma or GED Desirable
Minimum Test Scores
Reading 26
English 19
Mathematics 20
Algebra N/A
Other:
Current drivers license.
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
CABINETMAKING BASICS
Submitted by Griffin TI and board approved in March 1996.
Total Credits
CABINETMAKING FUNDAMENTALS
Submitted by Lanier TI and board approved in May 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAB 101 |
Cabinet Design & Layout |
2 |
Diploma |
|
CAB 102 |
Assembly I |
5 |
Diploma |
|
CAB 103 |
Cutting Cab. Components |
2 |
Diploma |
|
CAB 106 |
Assembly II |
5 |
Diploma |
|
CAR 101 |
Safe Use of Hand and Power Tools |
5 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
Total Credits 24
Admissions Criteria:
Meet special admissions criteria (only available for programs requiring no more than 25 hours).
Completion of application and related procedures.
CAD DRAFTING TECHNOLOGY
Submitted by Pickens TI and board approved in February 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
DDF 102 |
Size & Shape Descr. I |
5 |
Diploma |
|
DDF 103 |
Size & Shape Descr. II |
5 |
Diploma |
|
DDF 105 |
Auxiliary Views |
3 |
Diploma |
|
DDF 106 |
Fasteners |
3 |
Diploma |
|
DDF 107 |
Intro. to CAD |
5 |
Diploma |
|
DDF 108 |
Intersections & Dev. |
5 |
Diploma |
|
DDF 109 |
Assembly Drawings I |
5 |
Diploma |
|
OR |
|||
|
DDS 202 |
Advanced CAD |
(6) |
Diploma |
|
AND |
|||
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
Total Credits 36>37
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 26
English 18
Mathematics 24
Algebra
Other:
Drafting experience, permission of instructor, or meet prerequisites for all courses.
Or:
Meet special admissions criteria. (Only available for programs
requiring no more than 25 credit hours.)
CAD OPERATOR>ARCHITECTURAL
Submitted by Lanier TI and board approved in April 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CMP 101 |
Intro. to Microcomp. |
3 |
Diploma |
|
DDF 104 |
Pictorial Drawings |
3 |
Diploma |
|
DDF 107 |
Intro. to CAD5 Diploma |
||
|
DDS 205 |
Resid. Arch. Draw. I |
6 |
Diploma |
|
DDS 208 |
Resid. Arch. Draw. II |
6 |
Diploma |
Total Credits 23
Admissions Criteria:
1. Meet special admissions criteria (only available for programs requiring no more than 25 hours).
2. Two years drafting experience or exemption test.
3. Completion of application and related procedures.
CAD OPERATOR-MECHANICAL
Submitted by Lanier TI and board approved in April 1994.
|
Course# |
Name |
Credit Hrs. Source |
|
|
CMP 101 |
Intro. to Microcomp. |
3 |
Diploma |
|
DDF 104 |
Pictorial Drawings |
3 |
Diploma |
|
DDF 106 |
Fasteners |
3 |
Diploma |
|
DDF 107 |
Intro. to CAD |
5 |
Diploma |
|
DDF 109 |
Assembly Drawings I |
5 |
Diploma |
|
DDF 110 |
Assembly Drawings II |
5 |
Diploma |
Total Credits 24
Admissions Criteria:
1. Meet special admissions criteria (only available for programs requiring no more than 25 hours).
2. Two years drafting or exemption test.
3. Completion of application and related procedures.
CAD OPERATOR TRAINING
Submitted by Carroll TI and board approved in April 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
DDF 100 |
Introduction to CAD |
5 |
Diploma |
|
DDF 102 |
Size & Shape Descr. I |
5 |
Diploma |
|
DDF 103 |
Size & Shape Descr. II |
5 |
Diploma |
|
DDF 104 |
Pictorial Drawing |
3 |
Diploma |
|
DDF 105 |
Auxiliary Views |
3 |
Diploma |
|
DDF 106 |
Assembly Drawings I |
5 |
Diploma |
Total Credits 29
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 26
English 18
Mathematics 23
Algebra
Completion of application and related procedures.
Other: Previous drafting experience strongly recommended.
CAD TRACER
Submitted by Okefenokee TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CMP 101 |
Intro. to Microcomp. |
3 |
Diploma |
|
DDF 101 |
Intro. to Drafting |
6 |
Diploma |
|
DDF 102 |
Size & Shape Descr. I |
5 |
Diploma |
|
DDF 103 |
Size & Shape Descr. II |
5 |
Diploma |
|
DDF 105 |
Auxiliary Views |
3 |
Diploma |
|
DDF 106 |
Fasteners |
3 |
Diploma |
|
DDF 107 |
Intro. to CAD |
5 |
Diploma |
|
DDF 109 |
Assembly Drawings I |
5 |
Diploma |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
Total Credits 40
Admissions Criteria:
Required Age 16
High School Diploma or GED No
Minimum Test Scores
Reading 26
English 23
Mathematics 24
Algebra N/A
Completion of application and related procedures.
Other: Previous drafting experience strongly recommended.
CARPENTRY FRAMING
Submitted by Macon TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAR 101 |
Safe Use of Hand and Power Tools |
5 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
|
CAR 105 |
Print Reading |
5 |
Diploma |
|
CAR 110 |
Floor Framing |
3 |
Diploma |
|
CAR 111 |
Wall Framing |
3 |
Diploma |
|
CAR 112 |
Ceiling & Roof Framing |
6 |
Diploma |
Total Credits 27
Admissions Criteria:
Required Age 16
High School Diploma or GED Prior to graduation
Minimum Test Scores
Reading 18
English 15
Mathematics 14
Algebra 0
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
CEILING AND ROOF FRAMING
Submitted by West Georgia TI and board approved in November 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAR 101 |
Safe Use Hand/Power Tls |
5 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
|
CAR 105 |
Print Reading |
5 |
Diploma |
|
CAR 112 |
Ceiling and Roof Fram. |
6 |
Diploma |
Total Credits 21
Admissions Criteria:
Required Age 16
High School Diploma or GED No
Minimum Test Scores
Reading N/A
English N/A
Mathematics N/A
Algebra N/A
Or
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
CERTIFICATE IN LOCAL AREA NETWORKING TECHNOLOGY
Submitted by North Metro TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CIS 102 |
Intro. to Computers |
6 |
|
|
CIS 158 |
Networking I |
5 |
|
|
CIS 159 |
Networking II |
5 |
Total Credits 16
Admissions Criteria:
Required Age 16
High School Diploma or GED Either
Minimum Test Scores
Reading
English
Mathematics
Algebra
Completion of application and related procedures.
CERTIFIED MANUFACTURING SPECIALIST
Submitted by Athens TI and board approved in September 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AMF 152 |
Manuf. Org. Principles |
2 |
Newly Developed |
|
AMF 154 |
Manuf. Workplace Skills |
2 |
Newly Developed |
|
AMF 156 |
Manuf. Prod. Require. |
2 |
Newly Developed |
|
AMF 158 |
Auto. Manuf. Skills |
3 |
Newly Developed |
|
AMF 160 |
Rep. Manuf. Skills |
6 |
Newly Developed |
Total Credits 15
Admissions Criteria:
Required Age
High School Diploma or GED Yes
Minimum Test Scores
Reading 38
English 35
Math 35
CHASSIS TECHNICIAN
Submitted by North Metro TI and board approved in January 1996.
Total Credits
CNC>CAD/CAM PROGRAMMER
Submitted by Griffin TI and board approved in March 1994.
|
Course# |
Name |
Credit Hrs |
Source |
|
CMP 101 |
Intro. to Microcomp |
3 |
Diploma |
|
DDF 107 |
Intro. to CAD |
5 |
Diploma |
|
MAT 101 |
General Mathematics |
5 |
Diploma |
|
MCA 215 |
CNC Lathe Manual Prog. |
7 |
Diploma |
|
MCA 219 |
CAD/CAM Programming |
6 |
Diploma |
|
MCH 102 |
Blueprint Reading for Machine Tool |
5 |
Diploma |
|
MCH 105 |
Machine Tool Math II |
5 |
Diploma |
|
MCH 109 |
Lathe Operations I |
7 |
Diploma |
|
MCH 118 |
Computer/CNC Literacy |
5 |
Diploma |
Total Credits 55
Admissions Criteria:
Required Age 16
High School Diploma or GED N/A
Minimum Test Scores
Reading 38
English 35
Mathematics 35
Algebra 42
Other:
Regular program admission status, meet competency levels of all prerequisite courses, and/or appropriate industry experience.
CNC LATHE OPERATOR
Submitted by Columbus TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 101 |
General Mathematics |
5 |
Diploma |
|
MCA 211 |
CNC Fundamentals |
7 |
Diploma |
|
MCA 215 |
CNC Lathe Manual Prog. |
7 |
Diploma |
|
MCH 102 |
Blueprint Reading for Machine Tool |
5 |
Diploma |
|
MCH 104 |
Machine Tool Math I |
5 |
Diploma |
|
MCH 109 |
Lathe Operations I |
7 |
Diploma |
|
MCH 118 |
Computer/CNC Literacy |
5 |
Diploma |
Total Credits 41
Admissions Criteria:
Required Age 16
High School Diploma or GED N/A
Minimum Test Scores
Reading 18.5
English 16.4
Mathematics 16.5
Algebra 5.3
CNC MILL OPERATION
Submitted by Carroll TI and board approved in September 1994.
Total Credits
CNC PROGRAMMING
Submitted by Gwinnett TI and board approved in July 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MCA 211 |
CNC Fundamentals |
7 |
Diploma |
|
MCA 213 |
CNC Mill Manual Programming |
6 |
Diploma |
|
MCA 215 |
CNC Lathe Manual Programming |
6 |
Diploma |
|
MCA 219 |
CAD/CAM Programming |
6 |
Diploma |
|
MCH 105 |
Machine Tool Math II |
5 |
Diploma |
|
MCA 217 |
CNC Applications |
6 |
Elective |
|
MCA 250 |
Advanced Machine Tool Internship |
6 |
Elective |
|
MCH 114 |
Blueprint Reading II |
5 |
Elective |
|
MCH 118 |
Computer/CNC Literacy |
5 |
Elective |
Total Credits 35-36
Admissions Criteria:
Required Age
High School Diploma/GED
Minimum Test Scores
Reading 41
English 42
Math 31
Algebra 45
Other: Completion of course prerequisites or equivalent experience
CNC SET>UP AND PROGRAMMING
Submitted by Lanier TI and board approved in April 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MCA 211 |
CNC Fundamentals |
7 |
Diploma |
|
MCA 213 |
CNC Mill Manual Prog. |
7 |
Diploma |
|
MCA 215 |
CNC Lathe Manual Prog. |
7 |
Diploma |
|
MCA 217 |
CNC Practical Applica. |
6 |
Diploma |
Total Credits 27
Admissions Criteria:
1. Meet special admissions criteria.
A. Graduate of the Machine Tool Technology program (MCH 118 would have been completed by a graduate).
B. Two years of work experience in the machining field. The two years' experience would satisfy MCH 118.
2. Other:
Required Age
High School Diploma or GED
Minimum Test Scores
Reading
English
Mathematics
Algebra
CNC SPECIALIST
Submitted by North Georgia TI and board approved in June 1995.
|
Course# |
Name |
Credit Hrs |
Source |
|
MCA 211 |
CNC Fundamentals |
7 |
Diploma |
|
MCA 213 |
CNC Mill Manual Programming |
7 |
Diploma |
|
MCA 215 |
CNC Lathe Manual Programming |
7 |
Diploma |
|
MCA 217 |
CNC Practical Applications |
6 |
Diploma |
|
MCA 219 |
CAD/CAM Programming |
6 |
Diploma |
|
Electives |
5 |
Diploma |
Total Credits 38
Admissions Criteria:
Required Age 16
High School Diploma/GED yes
Minimum Test Scores
Reading 38
English 35
Math 35
Other: Completion of Machine Tool Technology diploma program or equivalent experience and knowledge per instructor and VP of Instruction.
COMB STRUCTURAL WELDING
Submitted by Middle Georgia TI and board approved in September 1995.
Total Credits 22
COMMERCIAL DOORS
Submitted by West Georgia TI and board approved in November 1994.
|
Course# |
Name |
Credit Hrs |
Source |
|
CAR 101 |
Safe Use Hand/Power Tls |
5 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
|
CAR 105 |
Print Reading |
5 |
Diploma |
|
CAR 130 |
Doors/Door Hardware |
2 |
Diploma |
|
WLD 133 |
Metal Weld/Cutting Tech |
3 |
Diploma |
Total Credits 20
Admissions Criteria
Required Age 16
High School Diploma or GED No
Minimum Test Scores
Reading N/A
English N/A
Mathematics N/A
Algebra N/A
Meets special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
COMMERCIAL ELECTRICIAN ASSISTANT
Submitted by Southeastern TI and board approved in April 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ELT 107 |
Commercial Wiring I |
4 |
Diploma |
|
ELT 108 |
Commercial Wiring II |
4 |
Diploma |
|
ELT 109 |
Commercial Wiring III |
4 |
Diploma |
|
ELT 151 |
Grounding and Bonding |
3 |
Diploma |
Total Credits 15
Admissions Criteria:
Special Admissions Criteria: Must have completed the Residential Electrician Assistant or have a Class I Electrician license.
COMMERCIAL TRUCK DRIVING
Submitted by Savannah TI and board approved in August 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CTD 101 |
Fundamentals of CTD |
5 |
Diploma |
|
CTD 102 |
Basic Operations |
5 |
Diploma |
|
CTD 103 |
Advanced Operations |
5 |
Diploma |
|
OR |
|||
|
CTD 104 |
Internship |
5 |
Diploma |
Total Credits 15
Admissions Criteria:
Required Age 21*
High School Diploma or GED N/A
Minimum Test Scores
Reading 18
English 15
Mathematics 14
Other:
1. Submit application for admission to institution.
2. Obtain MVR report for the last five years and submit a copy of the report to institution. MVR report cannot have more than 8 points and no DUI.
3. Complete application for CDL.
4. Pass DOT physical and drug test and submit a copy of the report to institution.
*Eighteen to twenty year olds may take the course; however, they can only drive a commercial truck in Georgia.
COMPUTER AIDED DRAFTING
Submitted by Dalton College and board approved in November 1995.
Total Credits
COMPUTER ELECTRONICS REPAIR
Submitted by Gwinnett TI and board approved in July 1995.
|
Course# |
Name |
Credit Hrs |
Source |
|
ELC 121 |
Microprocessors II |
4 |
Diploma |
|
ELC 122 |
Microprocessor Interfacing |
4 |
Diploma |
|
ELC 201 |
Computer Peripherals |
4 |
Diploma |
|
ELC 202 |
Networking |
3 |
Diploma |
|
ELC 203 |
Operating Systems |
3 |
Diploma |
|
ELC 204 |
High Level Languages |
3 |
Diploma |
|
ELC 205 |
Data Communications |
2 |
Diploma |
|
ELC 208 |
Computer System Troubleshooting |
3 |
Diploma |
Total Credits 26
Admissions Criteria:
Required Age
High School Diploma/GED
Minimum Test Scores
Reading 38
English 35
Math 31
Algebra 42
COMPUTER FUNDAMENTALS
Submitted by Altamaha TI and board approved in September 1995.
Total Credits
COMPUTER NETWORK ADMINISTRATION
Submitted by Clayton State and board approved in March 1995.
Total Credits
COMPUTER NETWORK TECHNICIAN
Submitted by Clayton State and board approved in March 1995.
Total Credits
COMPUTER NETWORKING
Submitted by Albany TI and board approved in February 1995.
Total Credits
COMPUTERIZED CONSTRUCTION MANAGEMENT
Submitted by Gwinnett TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CMP 101 |
Intro. to Microcomp. |
3 |
|
|
CMT 207 |
Construct. Drafting II |
3 |
|
|
CMT 211 |
Comp. Construct. Est. |
3 |
|
|
CMT 212 |
Comp. Construct. Acct. |
3 |
Total Credits 15
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 26
English 24
Mathematics 22
Algebra N/A
Completion of application and related procedures.
Other: Must have verifiable experience in the construction industry equivalent to 3 years' full>time experience and pass the NOCTI
carpentry exam.
CONCRETE FORMING
Submitted by West Georgia TI and board approved in November 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAR 101 |
Safe Use of Hand/Pwr Tls |
5 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
|
CAR 105 |
Print Reading |
5 |
Diploma |
|
CAR 131 |
Concrete Forming |
5 |
Diploma |
Total Credits 20
Admissions Criteria:
Required Age 16
Meets special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
CONSTRUCTION DRYWALL
Submitted by Ogeechee TI and board approved in September 1995.
Total Credits 15
CONSTRUCTION MASONRY
Submitted by Ogeechee TI and board approved in September 1995.
Total Credits 15
CONSTRUCTION SUPERINTENDENT/CONTRACTOR
Submitted by Gwinnett TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CMT 204 |
Construct. Scheduling |
2 |
|
|
CMT 217 |
Construct. Contracting |
7 |
|
|
MKT 101 |
Principles of Mgmt. |
5 |
AND
Electives (Choose 5>8 credits from the following.)
|
MKT 103 |
Business Law |
5 |
|
|
MKT 110 |
Entrepreneurship |
8 |
|
|
MSD 102 |
Legal Envir. for Supv. |
||
|
MSD 103 |
Leadership and Decisionmaking |
5 |
Total Credits 19>22
Admissions Criteria:
1. Meet special admissions criteria (only available for programs requiring no more than 25 hours).
2. Completion of application and related procedures.
3. Must have completed Residential Construction and Computerized Construction technical certificates.
DIESEL ENGINE PERFORMANCE TECHNOLOGY
Submitted by DeKalb TI and board approved in February 1995.
Total Credits
DIGITAL ELECTRONICS FOR INDUSTRIAL TECHNICIANS
Submitted by Macon TI and board approved in December 1995.
Total Credits 16
DRAFTING AIDE
Submitted by Valdosta TI and board approved in December 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
DDF 101 |
Intro. to Drafting |
6 |
Diploma |
|
DDF 102 |
Size & Shape Descr. I |
5 |
Diploma |
|
DDF 103 |
Size & Shape Descr. II |
5 |
Diploma |
|
DDF 107 |
Intro. to CAD |
5 |
Diploma |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
Total Credits 26
Admissions Criteria:
Required Age
High School Diploma or GED
Minimum Test Scores
Reading
English
Mathematics
Algebra
Other:
To meet admissions requirements as required for diploma tract applicants drafting.
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
DRIVEABILITY TECHNICAN
Submitted by Lanier TI and board approved in May 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 108 |
Ignition Systems |
6 |
Diploma |
|
AUT 111 |
Fuel & Exhaust Systems |
3 |
Diploma |
|
AUT 112 |
Emission Control Syst. |
12 |
Diploma |
Total Credits 21
Admissions Criteria:
Meet special admissions criteria. Competencies located in AUT 101 and AUT 106 are needed to enter this program, or prior automotive technical experience is required.
Completion of application and related procedures.
ELECTRIC ARC WELDING
Submitted by Moultrie TI and board approved in March 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
WLD 100 |
Intro. to Weld. Tech. |
6 |
Diploma |
|
WLD 104 |
Shielded Metal Arc Welding I |
6 |
Diploma |
|
WLD 105 |
Shielded Metal Arc Welding II |
6 |
Diploma |
Total Credits 18
Admissions Criteria:
Meet special admissions criteria.
Completion of application and related procedures.
ELECTRICAL DISCHARGE MACHINING
Submitted by Altamaha TI and board approved in September 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MCA 213 |
CNC Mill Manual Prog. |
7 |
Diploma |
|
MCA 217 |
CNC Practical Applica. |
6 |
Diploma |
|
MCA 250 |
Electrical Discharge Machining |
6 |
Special |
Total Credits 19
Admissions Criteria:
Meet special admissions criteria. The student must also be competent in CNC Equipment and may be tested by the instructor to prove knowledge of such equipment.
Completion of application and related procedures.
ELECTRICAL MAINTENANCE
Submitted by Ben Hill>Irwin TI and board approved in June 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CMP 101 |
Introduction to Microcomputers |
3 |
Diploma |
|
OR |
|||
|
ELC 111 |
Electronics Microcomputer Applications |
3 |
Diploma |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
ELC 106 |
Direct Current Circuits I |
4 |
Diploma |
|
ELC 109 |
Alternating Current I |
4 |
Diploma |
|
ELC 110 |
Alternating Current II |
4 |
Diploma |
|
IMT 129 |
Industrial Wiring I |
5 |
Diploma |
|
IMT 130 |
Industrial Wiring II |
5 |
Diploma |
|
IMT 101 |
Industrial Maintenance Safety Proc. |
2 |
Diploma |
|
Elective |
5 |
Electives |
Total Credits 37
Admissions Criteria:
Required Age 16
High School Diploma/GED no
Minimum Test Scores
Reading 32
English 32
Math 40
ELECTRICAL MAINTENANCE ASSISTANT
Submitted by Southeastern TI and board approved in March 1995.
Total Credits
ELECTRICAL TECHNICIAN
Submitted by Okefenokee TI and board approved in March 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ELT 101 |
Safety |
2 |
Diploma |
|
ELT 102 |
Electricity Principles |
9 |
Diploma |
|
ELT 103 |
Residential Wiring I |
4 |
Diploma |
|
ELT 104 |
Residential Wiring II |
4 |
Diploma |
|
ELT 105 |
Residential Wiring III |
3 |
Diploma |
|
ELT 106 |
Electr. Prints, Schem. |
3 |
Diploma |
|
MAT 101 |
General Mathematics |
5 |
Diploma |
Total Credits 30
Admissions Criteria:
Meet special admissions criteria.
Required Age 18
High School Diploma or GED No
Minimum Test Scores
Reading 33
English 32
Mathematics 31
Algebra
Completion of application and related procedures.
ELECTRONIC INSTRUMENTATION
Submitted by Albany TI and board approved in April 1995.
Total Credits
ELECTRONICS TECHNICAL ASSISTANT
Submitted by Heart of Georgia TI and board approved in July 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ELC 104 |
Soldering Tech. |
2 |
Diploma |
|
ELC 106 |
DC Circuits I |
4 |
Diploma |
|
ELC 108 |
DC Circuits II |
4 |
Diploma |
|
ELC 109 |
AC Circuits I |
4 |
Diploma |
|
ELC 110 |
AC Circuits II |
4 |
Diploma |
|
ELC 114 |
Solid State Devices I |
4 |
Diploma |
|
ELC 115 |
Solid State Devices II |
4 |
Diploma |
|
ELC 125 |
Solid State Devices III |
4 |
Diploma |
|
ELC 152 |
Prep. Elec. and Electronics Training I |
4 |
Diploma |
|
ELC 153 |
Prep. Elec. and Electronics Training II |
4 |
Diploma |
Total Credits 38
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 38
English 35
Mathematics 35
OR
A minimum of one year successful employment in field of study.
Other: Completion of application and related procedures for program admission.
ENGINE LATHES
Submitted by Athens TI and board approved in May 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 101 |
General Math |
5 |
Diploma |
|
MCH 101 |
Introduction |
6 |
Diploma |
|
MCH 102 |
Blueprint I |
5 |
Diploma |
|
MCH 107 |
Metals/Heat Treatment |
4 |
Diploma |
|
MCH 109 |
Lathes I |
7 |
Diploma |
|
MCH 110 |
Lathes II |
6 |
Diploma |
|
XXX XXX |
Electives |
4 |
Diploma |
Total Credits 37
Admissions Criteria:
Required Age 16
High School Diploma or GED No
Minimum Test Scores
Reading N/A
English N/A
Mathematics 25
Algebra N/A
ENGINE PERFORMANCE TECHNICAN
Submitted by Gwinnett TI and board approved in March 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto. Tech. |
3 |
Diploma |
|
AUT 106 |
Intro. to Auto. Electr. Systems |
6 Diploma |
|
|
AUT 108 |
Ignition Systems |
6 |
Diploma |
|
AUT 111 |
Fuel & Exhaust Systems |
3 |
Diploma |
|
AUT 112 |
Emission Control Syst. |
12 |
Diploma |
|
AUT 250 |
Adv. Electrn. Training |
4 |
Elective |
Total Credits 34
Admissions Criteria:
Meet special admissions criteria.
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 26
English 24
Mathematics 22
Algebra N/A
Completion of application and related procedures.
ENGINE REPAIR TECHNICIAN
Submitted by Thomas TI and board approved in March 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto. Tech. |
3 |
Diploma |
|
AUT 106 |
Intro. to Auto. Electr. Systems |
6 |
Diploma |
|
AUT 108 |
Ignition Systems |
6 |
Diploma |
|
AUT 111 |
Fuel & Exhaust Systems |
3 |
Diploma |
|
AUT 112 |
Emission Control Syst. |
12 |
Diploma |
Total Credits 30
Admissions Criteria:
Required Age 16
High School Diploma or GED Desirable
Minimum Test Scores
Reading 26
English 19
Mathematics 20
Algebra N/A
Other:
Current drivers license.
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
EXTERIOR FINISHES/TRIM/SOFFIT
Submitted by West Georgia TI and board approved in November 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAR 101 |
Safe Use Hand/Pwr. Tls. |
5 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
|
CAR 105 |
Print Reading |
5 |
Diploma |
|
CAR 118 |
Ext. Finishes and Trim |
5 |
Diploma |
|
CAR 121 |
Cornice and Soffit |
1 |
Diploma |
Total Credits 21
Admissions Criteria:
Required Age 16
Meets special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
FACILITIES MANAGEMENT
Submitted by Brunswick College and board approved in September 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CIT 102 |
Intro. to Computers |
5 |
Dip/Deg |
|
CIT 214 |
Microcomputer DBMS |
3 |
Dip/Deg |
|
D&D 221 |
CADD Applications |
5 |
Dip/Deg |
|
D&D 222 |
CADD Applications |
5 |
Dip/Deg |
|
D&D 250 |
CADD/DBM Integ. |
4 |
Newly Dev. |
|
PE 211 |
XXXXXXXXXXXXXXXXX |
2 |
Dip/Deg |
|
AND |
|||
|
D&D 114 |
Drafting & Design |
5 |
Dip/Deg |
|
OR |
|||
|
D&D 115 |
Drafting & Design |
(5) |
Dip/Deg |
Total Credits 29
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 38
English 35
Mathematics 35
Algebra
FAUX AND PAINTED FINISH
Submitted by Gwinnett TI and board approved in January 1995.
Total Credits
FIBER OPTICS TECHNICIAN
Submitted by Ben Hill-Irwin TI and board approved in January 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 105 |
Trigonometry |
5 |
|
|
TEL 110 |
Fund. Tel. Concepts |
4 |
|
|
TEL 111 |
Data Communications |
||
|
TEL 112 |
Digital Telephony |
6 |
|
|
TEL 116 |
Fiber Optics |
5 |
Total Credits 26
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 26
English 19
Mathematics 20
Algebra 22
Other:
Lift 50 lbs.
Competencies included in TEL 102, TEL 103, and TEL 105 are needed to enter this program, or prior experience in telecommunications is required.
FLOOR FRAMING
Submitted by West Georgia TI and board approved in November 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAR 101 |
Safe Use Hand/Pwr Tls |
5 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
|
CAR 105 |
Print Reading |
5 |
Diploma |
|
CAR 110 |
Floor Framing |
3 |
Diploma |
Total Credits 18
Admissions Criteria
Required Age 16
Meets special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
FLUID POWER
Submitted by South Georgia TI and board approved in October 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
IMT 101 |
2 |
Diploma |
|
|
IMT 113 |
8 |
Diploma |
|
|
IMT 115 |
4 |
Diploma |
|
|
IMT 116 |
2 |
Diploma |
Total Credits 16
Admissions Criteria:
Required Age 16
High School Diploma or GED No
Minimum Test Scores
Reading 26
English 18
Mathematics 24
Algebra 22
FLUX-CORED ARC WELDING
Submitted by Atlanta Area TI and board approved in June 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
WLD 100 |
Intro. to Welding |
6 |
Diploma |
|
WLD 101 |
Oxy. Fuel Cutting |
4 |
Diploma |
|
WLD 102 |
Blueprint Reading |
5 |
Diploma |
|
WLD 153 |
Flux-cored Arc Weld. |
5 |
State Elective |
Total Credits 20
Admissions Criteria:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
FUNDAMENTALS OF AIRFRAME MECHANICS
Submitted by Middle Georgia TI and board approved in November 1995.
Total Credits 27
GAS METAL ARC WELDING
Submitted by North Metro TI and board approved in December 1992.
|
Course# |
Name |
Credit Hrs. |
Source |
|
WLD 100 |
Intro. to Weld. Tech. |
6 |
Diploma |
|
WLD 101 |
Oxyfuel Cutting |
4 |
Diploma |
|
WLD 109 |
Gas Metal Arc Welding |
6 |
Diploma |
Total Credits 16
Admissions Criteria:
Required Age 16
Meet special admissions criteria.
GAS TUNGSTEN ARC WELDING
Submitted by West Georgia TI and board approved in May 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 100 |
Basic Mathematics |
3 |
Diploma |
|
WLD 100 |
Intro. to Weld. Tech. |
6 |
Diploma |
|
WLD 103 |
Blueprint Reading I |
3 |
Diploma |
|
WLD 108 |
Blueprint Reading II |
3 |
Diploma |
|
WLD 110 |
Gas Tungsten Arc Weld. |
4 |
Diploma |
|
WLD 150 |
Adv. Tungsten Arc Weld. |
5 |
Diploma |
Total Credits 24
Admissions Criteria:
Meet special admissions criteria.
Required Age 16
High School Diploma or GED
Minimum Test Scores
Reading 18
English 18
Mathematics 14
Algebra N/A
Completion of application and related procedures.
GAS TUNGSTEN ARC WELDING TECHNOLOGY
Submitted by Altamaha TI and board approved in September 1995.
Total Credits 20
GENERAL CONSTRUCTION
Submitted by Atlanta Area TI and board approved in April 1994.
Total Credits
GENERAL CONSTRUCTION FUNDAMENTALS
Submitted by Albany TI and board approved in February 1996.
Total Credits
GENERAL ELECTRICAL MAINTENANCE
Submitted by Moultrie TI and board approved in June 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
IMT 101 |
Industrial Maintenance Safety |
2 |
Diploma |
|
EIT 113 |
PLC I |
4 |
Diploma |
|
EIT 114 |
PLC II |
2 |
Diploma |
|
ELC 111 |
Introduction to Micros |
3 |
Diploma |
|
ACT 103 |
Electrical Fundamentals |
8 |
Diploma |
|
ACT 104 |
Electric Motors |
3 |
Diploma |
|
AMF 114 |
Sensory and Workcell Interfacing |
3 |
Diploma |
|
ACT 110 |
Natural Gas Equipment |
5 |
Diploma |
|
ACT 107 |
Troubleshooting Air Conditioning |
7 |
Diploma |
|
IMT 115 |
Industrial Pneumatics |
4 |
Diploma |
|
ELC xxx |
Sensors and Signal Conditioning |
1 |
Newly Developed |
|
DDS 107 |
Autocad, Windows, DOS |
8 |
Diploma |
Total Credits 50
Admissions Criteria:
Required Age 16
High School Diploma/GED yes
Minimum Test Scores
Reading 38
English 35
Math 35
GENERAL MAINTENANCE MECHANIC
Submitted by Ben Hill>Irwin TI and board approved in June 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
BFM 103 |
Fundamentals of Structural Maint. |
6 |
Diploma |
|
BFM 105 |
Fundamentals of Plumbing |
3 |
Diploma |
|
ELT 103 |
Residential Wiring I |
4 |
Diploma |
|
IMT 118 |
Introduction to AC and DC Motors |
4 |
Diploma |
|
IMT 120 |
Magnetic Starters and Braking |
4 |
Diploma |
|
ACT 100 |
Refrigeration Fundamentals |
4 |
Diploma |
|
MAT 101 |
General Mathematics |
5 |
Diploma |
Total Credits 30
Admissions Criteria:
Required Age 16
Other: Must have prior experience in general maintenance work or permission from the instructor.
OR
Meet special admissions criteria.
INDUSTRIAL/COMMERCIAL WIRING
Submitted by West Georgia TI and board approved in December 1995.
Total Credits
INDUSTRIAL CONTROLS TECHNICIAN
Submitted by Ben Hill>Irwin TI and board approved in June 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
IMT 118 |
Introduction to DC and AC Motors |
4 |
Diploma |
|
IMT 119 |
Fundamentals of Motor Controls |
4 |
Diploma |
|
IMT 120 |
Magnetic Starters and Braking |
4 |
Diploma |
|
IMT 121 |
Two-Wire Control Circuits |
3 |
Diploma |
|
IMT 122 |
Advanced Motor Controls |
3 |
Diploma |
|
IMT 123 |
Fundamentals of Variable Speed Control |
4 |
Diploma |
|
ELT 113 |
Programmable Logic Control I |
4 |
Diploma |
|
ELT 114 |
Programmable Logic Control II |
2 |
Diploma |
|
IMT 126 |
PLC Practicum |
4 |
Diploma |
|
IMT 150 |
Principles of Instrumentation for IM |
4 |
Diploma |
Total Credits 36
Admissions Criteria:
Required Age 16
High School Diploma/GED no
Minimum Test Scores
Reading 32
English 32
Math 35
Other: Interview with instructor and meet existing prerequisites and corequisites employed in industrial maintenance field.
INDUSTRIAL ELECTRICAL APPLICATIONS
Submitted by Dalton College and board approved in November 1995.
Total Credits
INDUSTRIAL ELECTRICAL TECHNOLOGY
Submitted by Ogeechee TI and board approved in
Total Credits
INDUSTRIAL ELECTROMECHANICAL TECHNICIAN
Submitted by Macon TI and board approved in December 1995.
Total Credits 24
INDUSTRIAL ELECTRONICS TECHNOLOGY
Submitted by Augusta TI and board approved in October 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
XXX xxx |
Optoelectronics/Fiber Optics |
5 |
|
|
XXX xxx |
Communications Circuits |
5 |
|
|
XXX xxx |
Industrial Electronics |
5 |
|
|
EET 255 |
Adv. Microcomputer Interface |
5 |
|
|
MET 204 |
Computer Aided Design |
4 |
Total Credits 24
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 32
English 30
Mathematics 0
Algebra 26
INDUSTRIAL FLUID POWER
Submitted by Middle Georgia TI and board approved in March 1995.
Total Credits
INDUSTRIAL GAS METAL ARC WELDING
Submitted by Swainsboro TI and board approved in July 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 100 |
Math |
3 |
Diploma |
|
WLD 100 |
Intro. to Welding |
6 |
Diploma |
|
WLD 103 |
Bluepring Reading I |
3 |
Diploma |
|
WLD xxx |
Indus. Gas Metal Arc Welding |
5 |
Newly created |
Total Credits 17
Admissions Criteria:
Meet special admissions criteria (only available for programs requiring no more than 25 credit hours).
INDUSTRIAL INSTRUMENTATION TECHNOLOGY
Submitted by Augusta TI and board approved in October 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
EMT 250 |
Control Systems II |
5 |
|
|
EMT 252 |
Prog. Controllers II |
4 |
|
|
EMT 253 |
Motor Control |
5 |
|
|
MET 204 |
Computer Aided Design |
4 |
|
|
XXX xxx |
Indust. Distrib. Syst. and Illumination |
5 |
Total Credits 23
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 32
English 30
Mathematics 0
Algebra 26
INDUSTRIAL MAINTENANCE WELDER ONE
Submitted by West Georgia TI and board approved in September 1994.
Total Credits
INDUSTRIAL MAINTENANCE WELDER TWO
Submitted by West Georgia TI and board approved in September 1994.
Total Credits
INDUSTRIAL MECHANICAL TECHNICIAN
Submitted by Lanier TI and board approved in April 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
IMT 108 |
Industrial Mechanics I |
7 |
Diploma |
|
IMT 110 |
Industrial Mechanics II |
6 |
Diploma |
|
IMT 113 |
Industrial Hydraulics |
8 |
Diploma |
|
IMT 115 |
Industrial Pneumatics |
4 |
Diploma |
Total Credits 25
Admissions Criteria:
Meet special admissions criteria.
Required Age
High School Diploma or GED
Minimum Test Scores
Reading
English
Mathematics
Algebra
Completion of application and related procedures.
INDUSTRIAL MECHANICS
Submitted by Macon TI and board approved in October 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
IMT 101 |
Ind. Maint. Safety Proc. |
2 |
Diploma |
|
IMT 108 |
Industrial Mech. I |
7 |
Diploma |
|
IMT 110 |
Industrial Mech. II |
6 |
Diploma |
|
IMT 113 |
Industrial Hydraulics |
8 |
Diploma |
|
IMT 119 |
Fund. of Motor Controls |
4 |
Diploma |
Total Credits 27
Admissions Criteria
Required Age 16
High School Diploma or GED N/A
Minimum Test Scores
Reading 38
English 35
Mathematics
Algebra 42
INDUSTRIAL MOTOR CONTROL TECHNICIAN
Submitted by Middle Georgia TI and board approved in March 1995.
Total Credits
INDUSTRIAL PREPARATION
Submitted by Macon TI and board approved in October 1995.
Total Credits 20
INDUSTRIAL PROGRAMMABLE CONTROL SYSTEMS
Submitted by North Metro TI and board approved in April 1993.
Modified with State Board Approval in May 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ELC 111 |
Electronics Microcomputer Apps. |
3 |
Diploma |
|
ELT 113 |
PLC I |
4 |
Diploma |
|
ELT 114 |
PLC II |
2 |
Diploma |
|
ELC 212 |
Motor Controls |
7 |
Diploma |
Total Credits 17
Admissions Criteria:
Meet special admissions criteria. Students will meet the current GDTAE admissions policy. In addition, on>the>job training and/or experience or other screening mechanisms
will be utilized to evaluate the applicants' potential to succeed in the program.
Required Age
High School Diploma or GED
Minimum Test Scores
Reading
English
Mathematics
Algebra
Completion of application and related procedures.
INDUSTRIAL WIRING TECHNICIAN
Submitted by Pickens TI and board approved in October 1995.
Total Credits 28
INFORMATION AND OFFICE TECHNOLOGY > MEDICAL SPECIALIST
Submitted by Flint River TI and board approved in July 1994.
Total Credits
INSTRUMENTATION TECHNICIAN I
Submitted by Altamaha TI and board approved in January 1995.
Total Credits
INSTRUMENTATION TECHNICIAN II
Submitted by Altamaha TI and board approved in July 1995.
Total Credits
INSULATION/INTERIOR WALL/CEILING COVER
Submitted by West Georgia TI and board approved in November 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAR 101 |
Safe Use Hand/Pwr Tls |
5 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
|
CAR 105 |
Print Reading |
5 |
Diploma |
|
CAR 115 |
Insul. & Int. Wall and Ceiling Cover |
4 |
Diploma |
Total Credits 19
Admissions Criteria:
Required Age 16
High School Diploma or GED No
Meets special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
LAN ADMINISTRATOR
Submitted by Gwinnett TI and board approved in March 1996.
Total Credits
LATHE OPERATOR
Submitted by Griffin TI and board approved in April 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 101 |
General Mathematics |
5 |
Diploma |
|
MAT 104 |
Geometry & Trigonometry |
5 |
Diploma |
|
MCH 101 |
Intro. to Machine Tool |
6 |
Diploma |
|
MCH 102 |
Blueprint Reading for Machine Tool |
5 |
Diploma |
|
MCH 109 |
Lathe Operations I |
7 |
Diploma |
|
MCH 110 |
Lathe Operations II |
6 |
Diploma |
|
MCH 114 |
Blueprint Reading II |
5 |
Diploma |
Total Credits 39
Admissions Criteria:
Required Age 16
High School Diploma or GED N/A
Minimum Test Scores
Reading 38
ASSET English 35
Mathematics 35
Algebra 42
Regular program admission status.
LIGHT COMMERCIAL AIR CONDITIONING
Submitted by Flint River TI and board approved in June 1994.
Total Credits
MACHINE TOOL INSPECTION BASICS
Submitted by Gwinnett TI and board approved in January 1996.
Total Credits 15
MACHINE TOOL OPERATOR
Submitted by Middle Georgia TI and board approved in October 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MCH 120 |
Introduction to Safety |
1 |
Newly Developed |
|
MCH 121 |
Machine Tool Shop Math |
2 |
Newly Developed |
|
MCH 122 |
Blueprint Reading |
8 |
Newly Developed |
|
MCH 123 |
Precision Measurements |
2 |
Newly Developed |
|
MCH 124 |
Cutting Tool Overview |
1 |
Newly Developed |
|
MCH 125 |
Milling Machine Orientation |
2 |
Newly Developed |
|
MCH 126 |
Mill Applications |
6 |
Newly Developed |
Total Credits 22
Admissions Criteria:
Required Age 18
High School Diploma/GED yes
Meet Special Admissions Criteria
MANUAL DRIVE TRAIN AND AXLE REPAIR
Submitted by Athens TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto. Tech. |
3 |
Diploma |
|
AUT 105 |
Clutch Diagnosis and Repair |
3 |
Diploma |
|
AUT 203 |
Manual Transm./Trans. |
3 |
Diploma |
|
AUT 204 |
Drivelines |
3 |
Diploma |
|
AUT 205 |
Four-Wheel Drive Components |
3 |
Diploma |
Total Credits 15
Admissions Criteria:
Required Age 16
High School Diploma or GED No
Minimum Test Scores
Reading 26
English 18
Mathematics 20
Algebra
Or:
Meet special admissions criteria. (Only available for programs requiring no more than 25 credit hours.)
MANUFACTURING/MAINTENANCE TECHNOLOGY
Submitted by Brunswick College.
FOUNDATION COURSES
|
AT 101 |
Applied Technical Math |
5 |
Diploma |
|
ENG 100 |
Communication Skills |
5 |
Diploma |
|
M/MT 112 |
Industrial Safety |
3 |
Diploma |
|
M/MT 111 |
Basic TQM Concepts |
3 |
Diploma |
|
MAJOR AREA COURSES |
|||
|
M/MT 114 |
Basic Electricity |
5 |
Diploma |
|
M/MT 115 |
Blueprints/Schematics |
3 |
Diploma |
|
M/MT 116 |
Motor/Controls Fund. |
5 |
Diploma |
|
M/MT 118 |
Applied Mechanics |
5 |
Diploma |
|
M/MT 119 |
Advanced Mechanics |
4 |
Diploma |
|
M/MT 120 |
Preventative Maint. |
5 |
Diploma |
|
M/MT 121 |
Pneumatics |
3 |
Diploma |
|
M/MT 122 |
Hydraulics |
5 |
Diploma |
|
ELECTIVES |
|||
|
D&D 101 |
Engin. Draft. & Des. |
5 |
Diploma |
|
CIT 102 |
Intro. to Computers |
5 |
Diploma |
|
MT 102 |
Mach. Tech. Th. & Prac. |
6 |
Diploma |
|
WELD 161 |
Maintenance Welding |
5 |
Diploma |
|
AT 104 |
Cooperative Training |
5 |
Diploma |
Total Credits 61
Admissions Criteria:
Required Age 16
High School Diploma or GED Recommended (May be denied admission if ASSET scores are below regular admission cut-off scores.)
Minimum Test Scores
Reading
English
Mathematics
Algebra
MECHANICAL MAINTENANCE ASSISTANT
Submitted by Southeastern TI and board approved in March 1995.
Total Credits
MECHANICAL TROUBLESHOOTING
Submitted by Macon TI and board approved in January 1997.
|
Course# |
Name |
Credit Hrs. |
Source |
|
DIS 150 |
Analytical Troubleshooting |
3 |
New |
|
IMT 110 |
Industrial Mechanics II |
6 |
Diploma |
|
IMT 115 |
Industrial Pneumatics |
4 |
Diploma |
|
IMT 133 |
Industrial Maintenance Overview |
3 |
Diploma |
Total Credits 15
Admissions Criteria:
Required Age 18
High School Diploma/GED yes
Minimum Test Scores
Reading 38
English 35
Math 40
Algebra 42
Meet special admissions criteria.
MICROWAVE REPAIR
Submitted by Atlanta Area TI and board approved in June 1994.
Total Hrs.
MIG WELDING
Submitted by West Georgia TI and board approved in May 1993.
|
Course# |
Name |
Credit Hrs |
Source |
|
MAT 100 |
Basic Mathematics |
3 |
Diploma |
|
WLD 100 |
Intro. to Weld. Tech. |
6 |
Diploma |
|
WLD 101 |
Oxyfuel Cutting |
4 |
Diploma |
|
WLD 103 |
Blueprint Reading I |
3 |
Diploma |
|
WLD 108 |
Blueprint Reading II |
3 |
Diploma |
|
WLD 109 |
Gas Metal Arc Welding |
6 |
Diploma |
Total Credits 25
Admissions Criteria:
Required Age 16
High School Diploma or GED
Minimum Test Scores
Reading 18
English 18
Mathematics 14
Completion of application and related procedures.
MILL ELECTRICAL INSTRUMENT TECHNICIAN
Submitted by Altamaha TI and board approved in October 1996.
MILLING MACHINE OPERATOR
Submitted by Athens TI and board approved in May 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 101 |
General Mathematics |
5 |
Diploma |
|
MCH 101 |
Intro. to Machine Tool |
6 |
Diploma |
|
MCH 102 |
Blueprint Reading for Machine Tool |
5 |
Diploma |
|
MCH 107 |
Char. of Metals/Heat Treatment |
4 |
Diploma |
|
MCH 115 |
Mill Operations I |
7 |
Diploma |
|
MCH 116 |
Mill Operations II |
6 |
Diploma |
|
XXX XXX |
Electives |
4 |
Electives |
Total Credits 37
Admissions Criteria:
Required Age 16
High School Diploma or GED No
Minimum Test Scores
Reading N/A
English N/A
Mathematics 25
Algebra N/A
MILLING MACHINES
Submitted by Griffin TI and board approved in March 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 101 |
General Mathematics |
5 |
Diploma |
|
MAT 104 |
Geometry & Trigonometry |
5 |
Diploma |
|
MCH 101 |
Intro. to Machine Tool |
6 |
Diploma |
|
MCH 102 |
Blueprint Reading for Machine Tool |
5 |
Diploma |
|
MCH 114 |
Blueprint Reading II |
5 |
Diploma |
|
MCH 115 |
Mill Operations I |
7 |
Diploma |
|
MCH 116 |
Mill Operations II |
6 |
Diploma |
Total Credits 39
Admissions Criteria:
Required Age 16
High School Diploma or GED N/A
Minimum Test Scores
Reading 38
English 35
Mathematics 35
Algebra 42
Other:
Regular program admission status.
MITSUBISHI WIRE E.D.M. OPERATOR/PROGRAMMER
Submitted by Griffin TI and board approved in September 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MCA 211 |
CNC Fundamentals |
7 |
Diploma |
|
MCA 217 |
Practical Applications |
6 |
Diploma |
|
MCA 219 |
CAD/CAM Programming |
6 |
Diploma |
Total Credits 19
Admissions Criteria:
Required Age 16
Minimum Test Scores
Reading 38
English 35
Algebra 42
Other:
1. Diploma in Machine Tool Technology or certified work experience
2. Recommendation by program faculty and designated Educational Services
Division personnel on the basis of interview and assessment of student
potential.
MOLD DESIGN FOR PLASTICS
Submitted by North Georgia TI and board approved in June 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MCA 226 |
Machining Math III |
5 |
Diploma |
|
MCA 230 |
Mold Design I |
5 |
Diploma |
|
MCA 231 |
Mold Design II |
5 |
Diploma |
|
MCA 232 |
Plastics Theory |
5 |
Diploma |
|
MCA 235 |
Mold Construction I |
4 |
Diploma |
|
MCA 237 |
Mold Construction II |
5 |
Diploma |
|
MCA 237 |
Machining Electricity |
5 |
Diploma |
|
Electives |
4 |
Diploma |
Total Credits 38
Admissions Criteria:
Required Age: 16
High School Diploma/GED yes
Minimum Test Scores
Reading 38
English 35
Math 35
Other: Completion of Machine Tool Technology diploma program or equivalent experience and knowledge per instructor and VP of Instruction
MOTOR CONTROL TECHNICIAN
Submitted by Lanier TI and board approved in May 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
IMT 118 |
DC & AC Motors |
4 |
Diploma |
|
IMT 119 |
Fund. of Motor Controls |
4 |
Diploma |
|
IMT 120 |
Magnetic Start. & Brak. |
4 |
Diploma |
|
IMT 121 |
Two-Wire Ctrl. Circuits |
3 |
Diploma |
|
IMT 122 |
Adv. Motor Control |
3 |
Diploma |
Total Credits 18
Admissions Criteria:
1. Prior experience in motor maintenance areas required.
2. Required Age
High School Diploma or GED
Minimum Test Scores
Reading
English
Mathematics
Algebra
Completion of application and related procedures.
NETWORK INSTALLER
Submitted by North Metro TI and board approved in August 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
ELC 104 |
Soldering Technology I |
2 |
Diploma |
|
ELC 106 |
Direct Current Circuits I |
4 |
Diploma |
|
ELC 108 |
Direct Current Circuits II |
4 |
Diploma |
|
ELC 109 |
Alternating Current I |
4 |
Diploma |
|
ELC 110 |
Alternating Current II |
4 |
Diploma |
|
ELC 111 |
Electronics Micro. App. I |
3 |
Diploma |
|
ELC 228 |
Antenna Systems |
4 |
Diploma |
|
TEL 110 |
Fund. Telecomm. Concepts |
4 |
Diploma |
Total Credits 34
Admissions Criteria:
Required Age 16
High School Diploma/GED yes
Minimum Test Scores
Reading 38
English 35
Math 39
Algebra 42
NETWORKING TECHNICIAN
Submitted by Atlanta Area TI and board approved in June 1994.
Total Credits
911>DISPATCHER
Submitted by Clayton State and board approved in September 1995.
Total Credits
OLYMPIC CONSTRUCTION
Submitted by Georgia Dept. of Tech. & Adult Ed.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAR 101 |
Safe Use of Hand and Power Tools |
5 |
Diploma |
|
CAR XXX |
Construction Fund. |
5 |
Newly Dev. Course |
|
MAT 100 |
Basic Mathematics |
3 |
Diploma |
|
PSY 100 |
Interper. Relations & Professional Devel. |
3 |
Diploma |
|
EMP 101 |
Job Acqu. & Emp. Skills |
2 |
Diploma |
Total Credits 18
Admissions Criteria:
Required Age
High School Diploma or GED
Minimum Test Scores
Reading
English
Mathematics
Algebra
OLYMPIC CONSTRUCTION--DRYWALL
Submitted by Atlanta Area TI and board approved in October 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAR 101 |
Safe Use Hand/Pwr Tls |
5 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
|
CAR 115 |
Insulation, Interior Wall/Ceiling Cvrs |
5 |
Diploma |
Total Credits 15
Admissions Criteria:
Meet special admissions criteria. (Only available for programs
requiring no more than 25 credit hours.)
PAINT AND FINISHING OPERATIONS
Submitted by Pickens TI and board approved in December 1992.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ACR 100 |
Safety |
1 |
Diploma |
|
ACR 130 |
Sand., Prim., and Paint Prep |
4 |
Diploma |
|
ACR 131 |
Acryl. Lacq. Refinish. Applica 3 |
Diploma |
|
|
ACR 132 |
Special Refinishing Application |
4 |
Diploma |
|
ACR 133 |
Acryl. Enam. Refinish. Application |
6 |
Diploma |
|
ACR 134 |
Ureth. Enam. Refinish. Application |
6 |
Diploma |
Total Credits 24
Admissions Criteria:
Meet special admissions criteria.
Completion of application and related procedures.
PAINTING AND REFINISHING SPECIALIST
Submitted by Valdosta TI and board approved in September 1994.
Total Credits
PC MAINTENANCE TECHNICIAN
Submitted by North Metro TI and board approved in July 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CIS 122 |
Microcomputer Install. And Maintenance |
3 |
Diploma |
|
ELC 104 |
Soldering Technology |
2 |
Diploma |
|
ELC 106 |
DC Circuits I |
4 |
Diploma |
|
ELC 108 |
DC Circuits II |
4 |
Diploma |
|
ELC 118 |
Digital Electronics I |
4 |
Diploma |
|
ELC 119 |
Digital Electronics II |
4 |
Diploma |
|
ELC 120 |
Microprocessors I |
4 |
Diploma |
|
ELC 201 |
Computer Peripherals |
4 |
Diploma |
|
ELC 208 |
Computer System Troublesh. |
3 |
Diploma |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
CIS 158 |
Networking I |
5 |
Diploma |
|
ELC 111 |
Electronics Micro. Apps. I |
3 |
Diploma |
|
ELC 205 |
Data Communications |
2 |
Diploma |
Total Credits 47
Admissions Criteria:
Required Age 16
High School Diploma/GED yes
Minimum Test Scores
Reading 38
English 35
Math 39
Algebra 42
PLASTICS TECHNOLOGY - BLOWMOLDING
Submitted by Gwinnett TI and board approved in January 1997.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AMF 103 |
Manufacturing Processes Survey |
3 |
Diploma |
|
AMF 105 |
Hydraulic and Pneumatic Principles |
2 |
Diploma |
|
AMF 106 |
Introduction to Robotics |
4 |
Diploma |
|
DFT 191 |
Engineering Graphics |
3 |
Diploma |
|
EET 101 |
D.C. Circuit Analysis |
5 |
Diploma |
|
MCH 104 |
Machine Math I |
5 |
Diploma |
|
XXX xxx |
Plastics Theory and Application |
5 |
New |
|
XXX xxx |
Plastic Extrustion Principles |
5 |
New |
|
XXX xxx |
Blowmolding Principles |
3 |
New |
Total Credits 35
Admissions Criteria:
Required Age 16
High School Diploma/GED yes
Asset Scores
Reading 38
Writing 35
Math 35
Other: Completion of application and related procedures.
PLASTICS TECHNOLOGY - INJECTION MOLDING
Submitted by Gwinnett TI and board approved in January 1997.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AMF 103 |
Manufacturing Processes Survey |
3 |
Diploma |
|
AMF 105 |
Hydraulic and Pneumatic Principles |
2 |
Diploma |
|
AMF 106 |
Introduction to Robotics |
4 |
Diploma |
|
DFT 191 |
Engineering Graphics |
3 |
Diploma |
|
EET 101 |
D.C. Circuit Analysis |
5 |
Diploma |
|
MCH 104 |
Machine Math I |
5 |
Diploma |
|
XXX xxx |
Plastics Theory and Application |
5 |
New |
|
XXX xxx |
Injection Molding I |
5 |
New |
|
XXX xxx |
Mold Construction |
5 |
New |
|
XXX xxx |
Injection Molding II |
5 |
New |
Total Credits 42
Admissions Criteria:
Required Age 16
High School Diploma/GED yes
Asset Scores
Reading 38
Writing 35
Math 35
Other: Completion of application and related procedures.
PLASTICS TECHNOLOGY - THERMOFORMING
Submitted by Gwinnett TI and board approved in January 1997.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AMF 103 |
Manufacturing Processes Survey |
3 |
Diploma |
|
AMF 105 |
Hydraulic and Pneumatic Principles |
2 |
Diploma |
|
AMF 106 |
Introduction to Robotics |
4 |
Diploma |
|
DFT 191 |
Engineering Graphics |
3 |
Diploma |
|
EET 101 |
D.C. Circuit Analysis |
5 |
Diploma |
|
MCH 104 |
Machine Math I |
5 |
Diploma |
|
XXX xxx |
Plastics Theory and Application |
5 |
Diploma |
|
XXX xxx |
Plastic Extrusion Principles |
5 |
Diploma |
|
XXX xxx |
Thermoforming Processes |
5 |
Diploma |
Total Credits 37
Admissions Criteria:
Required Age 16
High School Diploma/GED yes
Asset Scores
Reading 38
Writing 35
Math 35
Other: Completion of application and related procedures.
PLUMBER'S ASSISTANT
Submitted by Griffin TI and board approved in March 1996
|
Course# |
Name |
Credit Hours |
Source |
|
PLB 101 |
Introduction to Plumbing |
9 |
Diploma |
|
PLB 103 |
Plumbing Installation Practices |
4 |
Diploma |
|
PLB 104 |
Plumbing Construction Practices |
3 |
Diploma |
|
PLB 106 |
Residential and Commercial Fixtures and Appliances I |
3 |
Diploma |
|
PLB 110 |
Drains, Waste and Vents I |
3 |
Diploma |
|
PLB 112 |
Gas Piping and Venting |
3 |
Diploma |
Total Credits 25
Admissions Criteria:
Required Age 16
High School Diploma/GED no
Minimum Test Scores no
Meet Special Admissions Criteria
PNEUMATIC INSTRUMENTATION
Submitted by Albany TI and board approved in April 1995.
Total Credits
PROCESS CONTROL INSTRUMENTATION
Submitted by Albany TI and board approved in April 1995.
Total Credits
PROGRAMMABLE CONTROLLER TECHNOLOGY
Submitted by Okefenokee TI and board approved in April 1993.
Total Credits 17
PROPERTY MAINTENANCE TECHNICIAN
Submitted by Heart of Georgia TI and board approved in March 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ACT 100 |
Refrigeration Fund. |
4 |
Diploma |
|
ACT 101 |
Principles & Practices of Refrigeration |
7 |
Diploma |
|
ACT 102 |
Refrigeration Systems Components |
7 |
Diploma |
|
ACT 103 |
Fund. of Structural Maintenance |
6 |
Diploma |
|
BFM 104 |
Build. Climate Ctrl. |
4 |
Diploma |
|
BFM 105 |
Fund. of Plumbing |
3 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
|
IMT 101 |
Indust. Maint. Safety Procedures |
2 |
Diploma |
|
MAT 101 |
General Mathematics |
5 |
Diploma |
Total Credits 51
Admissions Criteria:
Required Age 18
High School Diploma or GED No
Minimum Test Scores
Reading 33
English 32
Mathematics 31
Algebra N/A
Completion of application and related procedures.
PULP AND PAPER TECHNOLOGY
Submitted by Brunswick College and board approved in December 1995.
Total Credits
PULP, PAPER AND RECYCLE TECHNOLOGY
Submitted by Altamaha TI and board approved in October 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ENG 101 |
English |
5 |
Diploma |
|
MAT 103 |
Algebra |
5 |
Diploma |
|
CIS 100 |
Intro to Microcomp. |
3 |
Diploma |
|
PPR 101 |
Intro to Pulp, Paper and Recycle Tech. I |
4 |
Newly Developed |
Total Credits 17
Admissions Criteria:
Required Age 18
High School Diploma or GED Yes
Minimum Test Scores
Reading 38
English 35
Mathematics 42
Other: Must be currently employed in the Pulp, Paper and Recycle
industry or must be a prospective employee in the industry.
PULP, PAPER AND RECYCLE TECHNICIAN II
Submitted by Altamaha TI and board approved in February 1995.
Total Credits
PULP, PAPER AND RECYCLE TECHNICIAN III
Submitted by Altamaha TI and board approved in July 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ENG 102 |
Technical Writing |
5 |
Diploma |
|
PPR 103 |
Pulp, Paper and Recycle Tech. III |
4 |
Diploma |
|
IMT 100 |
Industrial Mechanics II |
6 |
Diploma |
Total Credits 15
Admissions Criteria:
1. Must be currently employee in the Pulp, Paper and Recycle Industry.
OR
2. Must be a prospective employee in the industry or view that industry as a potential
career area.
OR
3. Have completed Pulp, Paper and Recycle Technology I and II.
Required Age 18
High School Diploma/GED yes
Minimum Test Scores
Reading 38
English 35
Math 42
PULP, PAPER AND RECYCLE TECHNICIAN IV
Submitted by Altamaha TI and board approved in September 1995.
Total Credits
QUALITY ASSURANCE
Submitted by Ogeechee TI and board approved in September 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
MAT 104 |
Geometry and Trigonometry |
5 |
Diploma |
|
CMP 101 |
Intro. To Microcomputers |
3 |
Diploma |
|
PSY 100 |
Interpersonal Relations and Prof. Development |
3 |
Diploma |
|
ENG 102 |
Technical Writing |
5 |
Diploma |
|
MCH 102 |
Blueprint Reading for Machine Tool |
5 |
Diploma |
|
QCT 150 |
Small Engine Theory |
5 |
Newly Developed |
|
MCH 114 |
Blueprint Reading II |
5 |
Diploma |
|
QCT 110 |
QA Fundamentals |
5 |
Newly Developed |
Total Credits 41
Admissions Criteria:
Required Age 16
High School Diploma/GED Yes
Minimum Test Scores
Reading 38
English 35
Math 40
Algebra 42
QUALITY SPECIALIST
Submitted by North Metro TI and board approved in September 1995.
Total Credits
REFRIGERATOR AND FREEZER REPAIR
Submitted by Atlanta Area TI and board approved in June 1994.
Total Credits
QUALITY MANAGEMENT
Submitted by North Metro TI and board approved in July 1994.
Total Credits
RESIDENTIAL AIR CONDITIONING CALC APP
Submitted by Macon TI and board approved in October 1994.
Total Credits
RESIDENTIAL AND COMMERCIAL-INDUSTRIAL WIRING
Submitted by Bainbridge College and board approved in October 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ELC 151 |
Blueprint Reading for Electricians |
5 |
Diploma |
|
ELC 103 |
Wiring I |
5 |
Diploma |
|
ELC 112 |
Wiring II |
5 |
Diploma |
|
ELC 119 |
DC Motors and Controls |
5 |
Diploma |
|
ELC 123 |
AC Motors and Controls |
5 |
Diploma |
|
ELC 113 |
Commercial and Industrial Wiring |
5 |
Diploma |
Admissions Criteria
Required Age 16
Minimum Test Scores
Reading 38
English 35
Math 40
RESIDENTIAL CONSTRUCTION
Submitted by Gwinnett TI and board approved in October 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ACC 101 |
Principles of Acct. I |
5 |
|
|
CMT 140 |
Const. Methods & Tech. |
4 |
|
|
CMT 201 |
Resident. Est. Review |
4 |
|
|
CMT 205 |
Inspection Practices |
4 |
|
|
DDF 152 |
Archit. Blueprt. Read. |
3 |
Total Credits 20
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 26
English 24
Mathematics 22
Algebra N/A
Completion of application and related procedures.
Must have verifiable experience in the construction industry
equivalent ot 3 years' full>time experience and pass the NOCTI
carpentry exam.
RESIDENTIAL ELECTRICIAN ASSISTANT
Submitted by Southeastern TI and board approved in March 1995.
Total Credits
RESIDENTIAL WIRING
Submitted by Pickens TI and board approved in April 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ELT 101 |
Safety |
2 |
Diploma |
|
OR |
|||
|
IMT 101 |
Ind. Maint. Safe. Proc. |
(2) |
Diploma |
|
ELT 103 |
Residential Wiring I |
4 |
Diploma |
|
ELC 106 |
DC Circuits I |
4 |
Diploma |
|
ELC 109 |
Alternating Current I |
4 |
Diploma |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
Total Credits 23
Admissions Criteria:
Required Age 16
High School Diploma or GED
Minimum Test Scores
Reading
English
Mathematics 20
Algebra
Completion of application and related procedures.
SATELLITE COMMUNICATIONS
Submitted by Gwinnett TI and board approved in July 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
TEL 110 |
Fund. Telecom. Con. |
4 |
Diploma |
|
TEL 111 |
Data Communications |
6 |
Diploma |
|
TEL 112 |
Digital Telephony |
6 |
Diploma |
|
TEL 141 |
Intro. to Telephony |
3 |
Diploma |
|
TEL 142 |
Guided Media |
3 |
Diploma |
|
TEL 143 |
Satellite Comm. Tech. |
6 |
Diploma |
Total Credits 28
Admissions Criteria
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Writing 35
Reading 38
Numerical 35
Other: Completion of application and related procedures; current
employment with and/or a minimum of one year experience with a
Satellite Communications industry/business.
SECURITY SYSTEM INSTALLER
Submitted by North Metro TI and board approved in July 1996
|
Course # |
Name |
Credit Hrs. |
Source |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
ELC 104 |
Soldering Technology |
2 |
Diploma |
|
ELC 106 |
Direct Current Circuits I |
4 |
Diploma |
|
ELC 108 |
Direct Current Circuits II |
4 |
Diploma |
|
ELC 109 |
Alternating Current I |
4 |
Diploma |
|
ELC 110 |
Alternating Current II |
4 |
Diploma |
|
ELC 111 |
Electronics Microcomp. Apps. I |
3 |
Diploma |
|
ELC 229 |
Security Systems |
4 |
Diploma |
Total Credits 30
Admissions Criteria:
Required Age 16
High School Diploma/GED yes
Minimum Test Scores
Reading 38
English 35
Math 39
Algebra 42
SERVICE AND REPAIR TECHNICIAN
Submitted by Gwinnett TI and board approved in March 1996.
Total Credits 37
SHIELDED METAL ARC WELDING
Submitted by West Georgia TI and board approved in May 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 100 |
Basic Mathemtatics |
3 |
Diploma |
|
WLD 100 |
Intro. to Weld. Tech. |
6 |
Diploma |
|
WLD 103 |
Blueprint Reading I |
3 |
Diploma |
|
WLD 104 |
Shielded Metal Arc Welding I |
6 |
Diploma |
|
WLD 105 |
Shielded Metal Arc Welding II |
6 |
Diploma |
|
WLD 106 |
Shielded Metal Arc Welding III |
6 |
Diploma |
|
WLD 107 |
Shielded Metal Arc Welding IV |
6 |
Diploma |
|
WLD 108 |
Blueprint Reading II |
3 |
Diploma |
Total Credits 39
Admissions Criteria:
Required Age 16
High School Diploma or GED
Minimum Test Scores
Reading 18
English 18
Mathematics 14
Algebra
Completion of application and related procedures.
SITE LAYOUTS/FOOTINGS/FOUNDATIONS
Submitted by West Georgia TI and board approved in November 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAR 101 |
Safe Use Hand/Pwr Tls |
5 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
|
CAR 105 |
Print Reading |
5 |
Diploma |
|
CAR 107 |
Site Layouts, Footings and Foundations |
4 |
Diploma |
Total Credits 15
Admissions Criteria:
Required Age 16
Meets special admissions criteria. (Only available for programs
requiring no more than 25 credit hours.)
SMALL ENGINE MECHANICS
Submitted by North Georgia TI and board approved in January 1996.
Total Credits 25
SMAW PIPE WELDING
Submitted by Altamaha TI and board approved in September 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
WLD 100 |
Introduction to Welding Tech. |
6 |
Diploma |
|
WLD 101 |
Oxyfuel Cutting |
4 |
Diploma |
|
WLD 104 |
SMAW I |
6 |
Diploma |
|
WLD 105 |
SMAW II |
6 |
Diploma |
|
WLD 106 |
SMAW III |
6 |
Diploma |
|
WLD 107 |
SMAW IV |
6 |
Diploma |
|
WLD 152 |
Pipe Welding |
5 |
Diploma |
|
WLD 112 |
Preparation for Industrial Preparation |
4 |
Diploma |
Total Credits 43
Admissions Criteria:
STAIRS
Submitted by West Georgia TI and board approved in November 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAR 101 |
Safe Use Hand/Pwr Tls |
5 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
|
CAR 105 |
Print Reading |
5 |
Diploma |
|
CAR 126 |
Stairs |
3 |
Diploma |
Total Credits 18
Admissions Criteria:
Required Age 16
Meets special admissions criteria. (Only available for programs
requiring no more than 25 credit hours.)
STRUCTURAL BLUEPRINT WELDER
Submitted by Middle Georgia TI and board approved in September 1995.
Total Credits 21
STRUCTURAL WELDING
Submitted by Bainbridge College and board approved in October 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
IMT 111 |
Welding I |
5 |
Diploma |
|
IMT 112 |
Welding II |
5 |
Diploma |
|
IMT 114 |
Welding III |
5 |
Diploma |
|
IMT 116 |
Welding IV |
5 |
Diploma |
|
IMT 151 |
Blueprint Reading for Welders |
5 |
Diploma |
Total Credits 25
Admissions Criteria:
Required Age 16
Minimum Test Scores
Reading 38
English 35
Math 40
OR
Meet special admissions criteria.
SURVEYING FUNDAMENTALS
Submitted by Pickens TI and board approved in February 1993.
Total Credits 32
SUSPENSION AND STEERING TECHNICAN
Submitted by Thomas TI and board approved in March 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto. Tech. |
3 |
Diploma |
|
AUT 103 |
Susp. & Steer. Systems |
8 |
Diploma |
|
AUT 106 |
Intro. to Auto. Electr. Systems |
6 |
Diploma |
Total Credits 17
Admissions Criteria:
Required Age 16
High School Diploma or GED Desirable
Minimum Test Scores
Reading 26
English 19
Mathematics 20
Algebra N/A
Other:
Current drivers license.
Or:
Meet special admissions criteria. (Only available for programs
requiring no more than 25 credit hours.)
TECHNICAL DESIGN GRAPHICS
Submitted by Augusta TI and board approved in December 1993.
No course information found at present; total credit hours are
listed below.
Total Credits 33
Admissions Criteria:
Required Age 16
High School Diploma or GED Yes
Minimum Test Scores
Reading 26
English 26
Mathematics
Algebra 22
TELECOMMUNICATIONS TECHNICIAN I
Submitted by North Metro TI and board approved in July 1996
|
Course # |
Name |
Credit Hrs. |
Source |
|
ELC 114 |
Solid State Devices I |
4 |
Diploma |
|
ELC 115 |
Solid State Devices II |
4 |
Diploma |
|
ELC 118 |
Digital Electronics I |
4 |
Diploma |
|
ELC 119 |
Digital Electronics II |
4 |
Diploma |
|
ELC 120 |
Microprocessors I |
4 |
Diploma |
|
TEL 116 |
Fiber Optics |
6 |
Diploma |
|
XXXxxx |
Electives |
5 |
Diploma |
|
AND ONE OF THE FOLLOWING |
|||
|
TEL 108 |
Telephone System Install. |
6 |
Diploma |
|
ELC 228 |
Antenna Systems |
4 |
Diploma |
|
ELC 229 |
Security Systems |
4 |
Diploma |
Total Credits 35-37
Admissions Criteria:
Required Age 16
High School Diploma/GED yes
Minimum Test Scores
Reading 38
English 35
Math 39
Algebra 42
TELECOMMUNICATIONS TECHNICIAN II
Submitted by North Metro TI and board approved in July 1996
|
Course # |
Name |
Credit Hrs. |
Source |
|
ELC 117 |
Linear Integrated Circuits |
4 |
Diploma |
|
ELC 125 |
Solid State Devices III |
4 |
Diploma |
|
ELC 201 |
Computer Peripherals |
4 |
Diploma |
|
ELC 208 |
Computer System Troublesh. |
3 |
Diploma |
|
CIS 158 |
Networking I |
5 |
Diploma |
|
TEL 110 |
Fundamental Tele. Concepts |
4 |
Diploma |
|
ELC 205 |
Data Communications |
2 |
Diploma |
|
XXXxxx |
Electives |
4 |
Diploma |
|
AND ONE OF THE FOLLOWING |
|||
|
TEL 108 |
Telephone System Installation |
6 |
Diploma |
|
ELC 228 |
Antenna Systems |
4 |
Diploma |
|
ELC 229 |
Security Systems |
4 |
Diploma |
Total Credits 34-36
Admissions Criteria:
Required Age 16
High School Diploma/GED yes
Minimum Test Scores:
Reading 38
English 35
Math 39
Algebra 42
TELEPHONE INSTALLER TECHNICIAN
Submitted by Ben Hill-Irwin TI and board approved in January 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
TEL 106 |
Fund. Telephony Skills |
4 |
|
|
TEL 107 |
Telephone Sys. Install. |
4 |
|
|
TEL 109 |
Troubleshtg. & Repair |
4 |
Total Credits 15
Admissions Criteria:
Lift 50 lbs and work up to 40 ft. aloft.
Or:
Meet special admissions criteria. (Only available for programs
requiriing no more than 25 credit hours.)
Competencies included in TEL 101, TEL 102, and MAT 103 are needed
to enter this program, or prior experience in telecommunications
is required.
TELEVISION, VIDEORECORDER, AND CAMCORDER REPAIR
Submitted by Albany TI and board approved in January 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
ELC 118 |
Digital Electronics |
4 |
Diploma |
|
ELC 120 |
Microprocessors I |
4 |
Diploma |
|
ELC 226 |
Video Systems I |
7 |
Diploma |
|
ELC 228 |
Antenna Systems |
4 |
Diploma |
|
ELC 230 |
Video Systems II |
7 |
Diploma |
Total Credits 26
Admissions Criteria:
Required Age 16
High School Diploma or GED
Minimum Test Scores
Reading
English
Mathematics
Algebra
Applicants shall meet course prerequisites, or have equivalent
experience obtained by working in TV/VCR repair or related fields.
Completion of application and related procedures.
TIG WELDING
Submitted by Pickens TI and board approved in April 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 100 |
Basic Mathematics |
3 |
Diploma |
|
WLD 103 |
Blueprint Reading I |
3 |
Diploma |
|
WLD 110 |
Gas Tungsten Arc Weld. |
4 |
Diploma |
|
WLD 150 |
Adv. Tungsten Arc Weld. |
5 |
Diploma |
Total Credits 15
Admissions Criteria:
1. Meet special admissions criteria.
2. Completion of application and related procedures.
TOOL AND DIE SPECIALIST
Submitted by North Georgia TI and board approved in June 1995.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MCA 220 |
Die Design I |
7 |
Diploma |
|
MCA 221 |
Die Construction I |
5 |
Diploma |
|
MCA 223 |
Die Design II |
7 |
Diploma |
|
MCA 224 |
Die Construction II |
5 |
Diploma |
|
MCA 226 |
Machining Math III |
5 |
Diploma |
|
MCA 228 |
Characteristics of Metals/Heat Treatment II |
4 |
Diploma |
|
Electives |
5 |
Diploma |
Total Credits 38
Admissions Criteria:
Required Age 16
High School Diploma/GED yes
Minimum Test Scores
Reading 38
English 35
Math 35
Other: Completion of Machine Tool Technology diploma program or equivalent experience and knowledge per instructor and VP of Instruction.
TRIM/FLOORS/DOORS
Submitted by West Georgia TI and board approved in November 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAR 101 |
Safe Use Hand/Pwr Tls |
5 |
Diploma |
|
CAR 103 |
Materials |
5 |
Diploma |
|
CAR 105 |
Print Reading |
5 |
Diploma |
|
CAR 117 |
Interior Trim |
2 |
Diploma |
|
CAR 123 |
Finish Floors |
3 |
Diploma |
|
CAR 125 |
Interior Doors |
2 |
Diploma |
Total Credits 22
Admissions Criteria:
Required Age 16
Meets special admissions criteria. (Only available for programs
requiring no more than 25 credit hours.)
TROUBLESHOOTING AUTO CONTROL SYSTEMS
Submitted by Macon TI and board approved in December 1995.
Total Credits 21
TRUCK/DIESEL REPAIR ASSISTANT
Submitted by Heart of Georgia TI and board approved in April 1996.
Total Credits
TRUCK REPAIR SYSTEMS TECHNICIAN
Submitted by DeKalb TI and board approved in February 1995.
Total Credits
TUNE>UP SPECIALIST
Submitted by Carroll TI and board approved in September 1993.
|
Course# |
Name |
Credit Hrs. |
Source |
|
AUT 100 |
Intro. to Auto. Tech. |
3 |
Diploma |
|
AUT 106 |
Intro. to Auto. Electr. Systems |
6 |
Diploma |
|
AUT 108 |
Ignition Systems |
6 |
Diploma |
|
AUT 111 |
Fuel & Exhaust Systems |
3 |
Diploma |
|
AUT 112 |
Emission Control Syst. |
12 |
Diploma |
Total Credits 30
Admissions Criteria:
Required Age 16
High School Diploma or GED No
Minimum Test Scores
Reading 26
English 18
Mathematics 20
Algebra
Completion of application and related procedures.
WALL FRAMING
Submitted by West Georgia TI and board approved in November 1994.
|
Course# |
Name |
Credit Hrs. |
Source |
|
CAR 101 |
Materials |
5 |
Diploma |
|
CAR 105 |
Print Reading |
5 |
Diploma |
|
CAR 111 |
Wall Framing |
3 |
Diploma |
Total Credits 18
Admissions Criteria:
Required Age 16
Meets special admissions criteria. (Only available for programs
requiring no more than 25 credit hours.)
WASHER AND DRYER REPAIR
Submitted by Atlanta Area TI and board approved in December 1995.
Total Credits
WIRE E.D.M. SPECIALIST
Submitted by Griffin TI and board approved in July 1996.
|
Course# |
Name |
Credit Hrs. |
Source |
|
MAT 101 |
General Math |
5 |
Diploma |
|
CH 102 |
Blueprint Reading |
5 |
Diploma |
|
MAT 103 |
Algebraic Concepts |
5 |
Diploma |
|
MAT 104 |
Geometry and Trig. |
5 |
Diploma |
|
MCA 211 |
CNC Fundamentals |
7 |
Diploma |
|
MCA 217 |
CNC Practical Apps |
6 |
Diploma |
|
MCH 118 |
Computer CNC Lit. |
5 |
Diploma |
|
MCA 219 |
CAD/CAM Programming |
6 |
Diploma |
Total Credits 44
Admissions Criteria:
Required Age 16
High School Diploma or GED N/A
Minimum Test Scores
Reading 38
English 35
Mathematics
Algebra 42
Other: Diploma in Machine Tool Technology or certified work
experience; recommendation by program faculty and designated
Educational Services Division personnel on the basis of interview
and assessment of student potential.
WIRELESS COMMUNICATIONS MANUFACTURING SPECIALIST I
Submitted by Atlanta Area TI and board approved in January 1997.
|
Course# |
Name |
Credit Hrs. |
Source |
|
PSY 100 |
Interpersonal Relations and Prof. Dev. |
3 |
Diploma |
|
ELC 103 |
Intro. to Electronics Technology |
2 |
Diploma |
|
ELC 104 |
Soldering Technology I |
2 |
Diploma |
|
ELC 106 |
Direct Current Circuits I |
4 |
Diploma |
|
ELC 108 |
Direct Current Circuits II |
4 |
Diploma |
|
ELC 109 |
Alternating Current I |
4 |
Diploma |
|
ELC 110 |
Alternating Current II |
4 |
Diploma |
Total Credits 23
Admissions Criteria:
Required Age 18
High School Diploma/GED yes
Minimum Test Scores
Reading grade 9
English grade 9
Math grade 9
Last updated on 1/4/98